American Data Supply carries a complete line of ICC fiber optic patch panels ranging from 12 port fiber optic enclosures to fiber optic enclosures that hold up to 12 adapter panels and support up to 192 ports. The new enclosures have been designed with added features to improve security, durability, ease of use and to allow maximum performance. For added security, the rear cover has been enhanced to limit rear access from anyone other than the installer/technician. Integral slide rails permit the enclosure to travel forward and backward within the rack, providing both front and rear access, thus making the installation process easier. We carry fiber optic enclosures from several manufacturers-please see a sampling of our fiber optic enclosures and fiber optic patch panels below.

West Coast (866) 342-3721-------East Coast (866) 650-DATA

We Supply Current FTTH Projects--SBC-Verizon Fiber To The Curb/Home Fiber Optic-Jumpers-OSP-Fiber Test Equipment

Corning (compatible) Fiber Optic Enclosures- Corning (compatible) Fiber Optic Patch Panels- Wholesale Fiber Optic Enclosure Pricing- Outdoor Fiber Optic Enclosures

Fiber Optic Enclosures-Fiber Optic Patch Panels- Wall Mount Fiber Optic Patch Panels- 24 Port Fiber Optic Patch Panels-Indoor Fiber Optic Patch Panels - 48 Port Fiber Optic Patch Panels-72 Port Fiber Optic Patch Panels- 144 Port Patch Panels- Rack Mount Fiber Optic Patch Panels- Fiber Optic Frames- Fiber Optic Main Distribution Frame -Network Bays- Open Bay Frame Systems

National Data Supply carries a complete line of fiber optic patch panels and fiber optic enclosures that are compatible with the Corning Fiber Optic Enclosure Line of products including our Corning (compatible) fiber optic patch panels, outdoor fiber optic enclosures,wallmount fiber optic panels and rackmount fiber optic patch panel fiber optic enclosures which are designed for direct termination of up to 144 fibers. We carry a full line of fiber optic enclosures and fiber optic patch panels from ICC, Signamax, Century, Emerson-Fiberconn, Fiber Connections, Corning, Telect, Superior , ADC and others.The RAC series patch panel accommodates up to 12 modular panels and is equipped with routing guides to limit bend radius and enhance strain-relief control. The heavy-duty metal body provides excellent protection for the inside fibers. We also offer a large variety of fiber optic connector adapters that are offered to meet your specific requirements. MTP module cassettes and module pre-assemblies are available for easy fiber installation and management. Fiber-Conn's rackmount patch enclosures are designed for direct termination of up to 144 fibers. The RAC series accommodates up to 12 modular panels and is equipped with routing guides to limit bend radius and enhance strain-relief control. The heavy-duty metal body provides excellent protection for the inside fibers. A large variety of connector adapters are offered to meet your specific requirements. MTP module cassettes and module pre-assemblies are available for easy fiber installation and management.

See our partial inventory of fiber optic enclosures below- we have listed Corning, Corning compatible, and Signamax fiber optic enclosures. We also specialize in custom fiber optic enclosures- call us or more information at (866) 342-3721 for all you fiber optic patch panel and fiber optic enclosure needs. Remember- we meet or beat all USA Based Pricing!

West Coast (866) 342-3721 East Coast (866) 650-DATA

Rack Mount Fiber Patch Panels The two-rack space four & six module fiber optic enclosures provide additional capacity for higher fiber count requirements, enabling up to 48 fiber capacity in the four module enclosure, and up to 72 fibers in the six-module version. Both enclosures feature recessed front panel, facilitating coupling access, and two access doors in front and rear. The plexi-glass front panel enables visual inspection when closed. All Signamax connector interface modules are compatible with the two-rack space enclosure.

The Signamax four-rack space, 12-module fiber optic enclosure contains all of the features of the two-rack space model, but with additional capacity to manage fiber counts up to 144. Cable entry/exit feature utilizes a flexible grommet seal, which is cut at time of installation to accommodate the desired cable diameters for entry and exit points. These grommets provide a dust & debris barrier during and after installation. All Signamax connector interface modules can be utilized in the four-rack space enclosure. Optional 12- and 24-fiber splice trays are available

. Rack Mount Fiber Optic Enclosures- more info

Part Number	Description	Price
UFE4-B	4-Module (24 to 48 Fiber) Rack Mount Enclosure, Black	Call
UFE6-B	6-Module (36 to 72 Fiber)Rack Mount Enclosure, Black	Call
UFE12-B	12-Module (72 to 144 Fiber) Rack Mount Enclosure, Black	Call
FST-12A	12-Fiber Aluminum Splice Tray for UFE Series Enclosures	Call
FST-24A	24-Fiber Aluminum Splice Tray for UFE Series Enclosures	Call

Wall Mount Fiber Optic Enclosures-more info

Signamax wall-mount fiber optic enclosures manage, protect & organize fiber optic terminations for single and multi-mode fiber optic cables. Enclosures accept Signamax modules to accommodate a variety of connector interfaces The WFE-2 supports from 12 to 24 fiber counts while the WFE4 accommodates from 12 to 48 fibers. Enclosures and connector modules are ordered separately.

WFE2-B

WFE4-B

Signamax Wall Mount Fiber Optic Enclosures

Wall Mount Fiber Optic Enclosure

Part Number	Description	Price
WFE2-B	2-Module (12 to 24 Fiber) Wall Mount Enclosure, Black	Call
WFE4-B	4-Module (24 to 48 Fiber) Wall Mount Enclosure, Black	Call

Signamax slide-out rack-mount panel provides a simple, high-density, low profile solution for easy access and management of fiber optic terminations in a one-rack space design. The rack-mount sliding tray panel accommodates up to 24 fibers in ST, SC, MTRJ and LC connector interfaces. The sliding-tray is equipped with slack-fiber storage spools, and comes complete with a number of cable management devices for organizing cables entering and exiting the panel. An optional splice tray is available.

2-Module Low Profile Slide-Out Rack Mount Fiber Optic Enclosure

Part Number	Description	Price
SL2M-B	2-Module (12 to 24 Fiber) Rack Mount Enclosure, Black	Call
FST-2M-B	12 Fiber Splice Tray for SL2M-B	Call

Fiber Optic Patch Panels

ST Fiber Optic Panels-ST Fiber Patch Panels

Part Number	Description	Price
12ST-FT	12-Port (12-Fiber) ST SM/MM Fiber Patch Panel	Call
16ST-FT	16-Port (16-Fiber) ST SM/MM Fiber Patch Panel	Call
24ST-FT	24-Port (24-Fiber) ST SM/MM Fiber Patch Panel	Call
32ST-FT	32-Port (32-Fiber) ST SM/MM Fiber Patch Panel	Call
48ST-FT	48-Port (48-Fiber) ST SM/MM Fiber Patch Panel	Call

SC Fiber Optic Panels-SC Fiber Patch Panels

Part Number	Description	Price
12SC-FT	12-Port (12-Fiber) SC SM/MM Fiber Patch Panel	Call
16SC-FT	16-Port (16-Fiber) SC SM/MM Fiber Patch Panel	Call
24SC-FT	24-Port (24-Fiber) SC SM/MM Fiber Patch Panel	Call
32SC-FT	32-Port (32-Fiber) SC SM/MM Fiber Patch Panel	Call
48SC-FT	48-Port (48-Fiber) SC SM/MM Fiber Patch Panel	Call

LC Fiber Optic Panels- LC Fiber Optic Patch Panels

Part Number	Description	Price
12LC-FT	12-Port (12-Fiber) LC SM/MM Fiber Patch Panel	Call
16LC-FT	16-Port (16-Fiber) LC SM/MM Fiber Patch Panel	Call
24LC-FT	24-Port (24-Fiber) LC SM/MM Fiber Patch Panel	Call
32LC-FT	32-Port (32-Fiber) LC SM/MM Fiber Patch Panel	Call
48LC-FT	48-Port (48-Fiber) LC SM/MM Fiber Patch Panel	Call

MT-RJ Fiber Optic Panels- MTRJ Fiber Patch Panels

Part Number	Description	Price
12MTRJ-FT	12-Port (24-Fiber) MT-RJ SM/MM Fiber Patch Panel	Call
16MTRJ-FT	16-Port (32-Fiber) MT-RJ SM/MM Fiber Patch Panel	Call
24MTRJ-FT	24-Port (48-Fiber) MT-RJ SM/MM Fiber Patch Panel	Call
32MTRJ-FT	32-Port (64-Fiber) MT-RJ SM/MM Fiber Patch Panel	Call
48MTRJ-FT	48-Port (96-Fiber) MT-RJ SM/MM Fiber Patch Panel	Call

12-Port Fiber Optic Mini Wall Mount Panels

Part Number	Description	Price
12MST-FT	12-Port (12-Fiber) ST MM/SM Fiber Panel w/89D Bracket	Call
12MSC-FT	12-Port (12-Fiber) SC MM/SM Fiber Panel w/89D Bracket	Call
12MMTRJ-FT	12-Port (24-Fiber) MT-RJ MM/SM Fiber Panel w/89D Bracket	Call
12MHST-FT	12-Port (12-Fiber) ST MM/SM Fiber Hinged Panel	Call
12MHSC-FT	12-Port (12-Fiber) SC MM/SM Fiber Hinged Panel	Call
12MHMTRJ-FT	12-Port (24-Fiber) MT-RJ MM/SM Fiber Hinged Panel	Call

For a general review of fiber optic technology, click here

We Supply FTTH Projects-SBC-Verizon Fiber To The Curb/Home Fiber Optic-OSP-Fiber Test Equipment


AFL-LL-400b Optical Splicing Enclosures AFL-LL-400b Pedestal Optical Splicing Enclosures	AFL-LL-500b Optical Splicing & Distribution Enclosures AFL- Optical Entrance Enclosures	ICC Fiber Optic Enclosures Lan Racks	Outside Plant Fiber Enclosures Click Here

Front & Rear Loading Fiber Optic Patch Panels
Our new fiber optic enclosures by Contech and fiber patch panels are available in multiple configurations with high density port counts in a minimum of space, which provide an extremely organized above the floor infrastructure and manageable cable reconfiguration. ConTech features a 256 port high density panel with either LC, MT-RJ, or MU connector configurations in the same foot print for migration ease from one connector style to another. Also available are high density 12 to 48 port 1 rack unit panels with ribbon array connectivity MP or MTP connectors Front & Rear Mounted Fiber Optic Enclosures

Versatile cassettes High density Front access Rear access Under floor
Innovative wire management
Retro-fit of existing panels LC, MT-RJ, MU, SC duplex Custom silk screening
19, 23, or 24 inch mounting

Corning (compatible) Wall Mount Enclosures

Corning (compatible) Wall Mount Fiber Optic Enclosures Fiber-Conn's wall-mount patch enclosures are designed for direct termination of up to 96 fibers. The WAC series wall mount fiber optic enclosures accommodate up to 8 modular panels and is equipped with routing guides to limit bend radius and enhance strain-relief control. The 16-gauge steel with corrosion-resistant black powder finish coat housing provides excellent protection for the inside fibers. Wall-mount available unloaded, as well as having the capability to become a full-splice enclosure with mechanical terminations. A large variety of connector adapters are offered to meet your specific requirements.

Features and Benefits

Three sizes available with up to 8 adapter panel capacity 16-gauge steel with corrosion-resistant black powder finish coat Swing-down door with cable strand for more work space Grommets at the top and bottom Strain-relief hardware and routing guides help maintain minimum bend radius. Available unloaded or fully loaded with capability of mechanical termination
Zip ties and installation screws included

Part No. WAC-1X-Price $71.39 each
Dimensions: Width = 6.5'', Depth = 1.5'', Height = 7''
Weight (unloaded): 2.1 lbs.
Features: Wall-mount enclosure accommodates 1 adapter panel (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with small pad lock. Entry point at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment. *The WAC-1X does not support splice trays.
Lead time: In Stock, Immediate Shipment

Part No. WAC-2X-Price $79.64 each
Dimensions: Width = 13'', Depth = 3.6'', Height = 9.2''
Weight (unloaded): 6.85 lbs.
Features: Wall-mount enclosure accommodates 2 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

Part No. WAC-4X- Price $95.79 each
Dimensions: Width = 13'', Depth = 3.5'', Height = 11.5''
Weight (unloaded): 7.95 lbs.
Features: Wall-mount enclosure accommodates 4 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment Part No. WAC-8X- Price $199.25 each
Dimensions: Width = 17'', 12.2''
Weight: 12.7 lbs.
Features: Wall-mount enclosure accepts 8 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without allowing any unwanted handling of fiber optic cables. Side swing doors allow user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

Part No. WAC-12X
Dimensions: Width=17.75", Depth = 5.87'', Height = 16.75"
Features: Wall-mount enclosure accepts 12 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall mount is lockable with a 1'' keyed barrel lock.
Lead time: In Stock, Immediate Shipment

Rack Mount Enclosures

Fiber Optic Patch Panels-Rack Mount (RAC Series)

Fiber-Conn's rackmount patch enclosures are designed for direct termination of up to 144 fibers. The RAC series accommodates up to 12 modular panels and is equipped with routing guides to limit bend radius and enhance strain-relief control. The heavy-duty metal body provides excellent protection for the inside fibers. A large variety of connector adapters are offered to meet your specific requirements. MTP module cassettes and module preassemblies are available for easy fiber installation and management.

Applications

Premise data network cabling and installations Central office locations for Telco applications Head-end location for CATV applications Termination of interconnect cables at entry or intermediate cross connects Termination of horizontal cables, cross connection or backbone cables to jumper cables
Splice capability with splice trays loaded.
Features and Benefits
- Fits 19-inch and 23-inch racks 1U, 2U, and 4U available Durable, clear front door for easy viewing of the interior; removable blackboard for easy access to terminated cables* Removable top lid for easy access for 2U products Front plexi-glass and rear steel doors with 1/4 turn latches to allow easy access from both sides Strain-relief hardward and routing guides help maintain minimum bend radius "D" shaped cutouts at front and rear for easy access of cable Available fully populated with adapters, pigtails and slice trays or unloaded Labeling kit, zip ties and installation screws included
- Competitive pricing and prompt delivery
*Note: Clear front door is not available

ATS-RAC-1x Rack Mount Fiber Optic Enclosure

36 Port Rack Mount Fiber Optic Enclosure- Rack Mount Fiber Patch Panel Part No. ATSRAC-1X- Price $97.00
Dimensions: Width = 17'', Depth = 12'', Height = 1.75''
Weight (unloaded): 10.3 lbs.
Port Capacity: 6-36
Features: 1U rackmount can be loaded with up to 3 panels with 6 to 36 port capacity. Reversible mounting bracket for 19'' or 23'' racks. 16-gauge steel with black powder finish coat. Steel door at front and at rear with ¼ turn latches. Top lid removable at both front and rear. Cable management spools in the rear of the enclosure and cable management rings to the front for jumper management. Sliding tray for access to both front and rear. Large entry points at front for easy jumper management, as well as "D" shaped cutouts at rear for access of backbone cable. Accessory pack included with additional cable management, label holders and screws for securing to rack and top panels. Labeling kit included for clear and precise identification of ports.
Lead time: In Stock, Immediate Shipment

ATS 19” Rack Mount Fiber Optic Enclosure

Features and Benefits

Fits 19-inch and 23-inch racks 1U, 2U, and 4U available Durable, clear front door for easy viewing of the interior; removable blackboard for easy access to terminated cables* Removable top lid for easy access for 2U products Front plexi-glass and rear steel doors with 1/4 turn latches to allow easy access from both sides Strain-relief hardward and routing guides help maintain minimum bend radius "D" shaped cutouts at front and rear for easy access of cable Available fully populated with adapters, pigtails and slice trays or unloaded Labeling kit, zip ties and installation screws included
Competitive pricing and prompt delivery

Part No. ATSRAC-12-OP ATS19" 12 Port Rack Mount Enclosure, Holds 2 ( 6 Packs ) Price $ 56.00

Part No. ATSRAC-24-OP National Data Supply 24 Port Rack Mount Enclosure, Holds 4 ( 6 Packs ) Price $ 75.00

New is a ATS-RS24 and National Data Supply F1-RS72 rack mount splice and termination enclosure. Allows for patching on top and convenient organization of splice trays in the bottom shelf. Both 24 and 72 patch and splice versions are available. Call National Data Supply at (866) 342-3721 to order in black 16 gauge steel. .

Enclosure is constructed of 16 gauge steel with convenient swivel out base for easy access to fiber optic cables.
Call National Data Supply at (866) 342-3721 to order in black 16 gauge steel.

Part No. ATSRS-24 National Data Supply 19" 24 Port Rack Mount Enclosure, Holds 4 ( 6 Packs ) ) Price $ 189.00 each

Part No. ATSRS National Data Supply 72 Port Rack Patch & Splice Enclosure ) Price $ 270.00 each

The National Data Supply Rack Mount Enclosure is designed for low or high density patching applications. This sturdy 16 gauge aluminum rack enclosure is available in 24, 48, 72, 96 and 144 port versions in standard beige. This unit provides a lift-off door with front and back access to the slideout tray. The ATS Rack Mount Enclosure features a smoked Lexan front door. Call ATS at 1-866-342-3721 to order in black 16 gauge steel.

Enclosure is constructed of 16 gauge steel with convenient swivel out base for easy access to fiber optic cables.
Call National Data Supply at (866) 342-3721 to order in black 16 gauge steel.ATS-F1RM144X - 144 Port Rack Mount Enclosure, unloaded, holds 24 six packs, 13 1/2"D x 17 1/8"W x 15"H, 19lbs.

ATS-F1RM24XA - 24 Port Rack Mount Enclosure, unloaded, holds 4 six packs, 13 1/4"D x 17 1/8"W x 3 1/2"H, 12lbs.

ATS-F1RM48X - 48 Port Rack Mount Enclosure, unloaded, holds 6 eight packs, 13 1/4"D x 17 1/8"W x 4 3/4"H, 14lbs.
ATS-F1RM72X - 72 Port Rack Mount Enclosure, unloaded, holds 12 six packs, 13 1/4"D x 17 1/8"W 7 1/8"H, 17lbs.

Part No. ATS-F1RM144X- National Data Supply 144 Port Rack Mount Enclosure, Holds 24 ( 6 Packs ) Price $ 245.00 each

Part No. ATS-F1RM24XA -National Data Supply 24 Port Rack Mount Enclosure, Holds 4 ( 6 Packs ) Price $ 99.00 each Part No. ATS-F1RM48X- National Data Supply 48 Port Rack Mount Enclosure, Holds 6 ( 8 Packs ) Price $ 112.00 each

Part No.ATS-F1RM72X ATSATS 72 Port Rack Mount Enclosure, Holds 12 ( 6 Packs ) Price $170.00 each

------------------------ FIS24 Port Rack Mount Enclosure, Holds 4 ( 6 Packs ) ---- --

24 port Rack Mount Fiber Optic Enclosure- Rack Mount Fiber Optic Patch Panel Part No. ATSRAC-12X-Price $96.00
Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
Weight (unloaded): 12 lbs.
Port Capacity: 6-24
Features: 2U rackmount can be loaded with 2 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extension brackets for 23'' rack. 16-gauge steel with black powder finish coat. Removable top lid for easy access to fiber. Spools at the rear for neat and clean cable management.
Lead time: In Stock, Immediate Shipment

48 Port Rack Mount Fiber Optic Enclosure- Rack Mount Patch Panel Part No. ATSRAC-24X- Price $100.50
Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
Weight (unloaded): 12 lbs.
Port Capacity: 6-48
Features: 2U rackmount can be loaded with 4 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extension brackets for 23'' rack. 16-gauge steel with black powder finish coat. Removable top lid for easy access to fiber. Spools at the rear for neat and clean cable management.
Lead time: In Stock, Immediate Shipment

72 Port Rack Mount Fiber Optic Enclosure- Rack Mount Patch Panel Part No. National Data Supply RAC-2X- Price $105.00
Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
Weight (unloaded): 12 lbs.
Port Capacity: 6-72
Features: 2U rackmount can be loaded with 6 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extension brackets for 23'' rack. 16-gauge steel with black powder finish coat. Removable top lid for easy access to fiber. Sliding tray for high-density situations. Spools at the rear for neat and clean cable management.
Lead time: In Stock, Immediate Shipment

144 Port Rack Mount Enclosure- Rack Mount Fiber Patch PanelPart No. RAC-4X Price- $173.25
Dimensions: Width = 17'', Depth = 12'', Height = 7''
Weight (unloaded): 11.5 lbs.
Port Capacity: 6-144
Features: 4U enclosure can be loaded with 12 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extensions for 23'' racks. 16-gauge steel with corrosion-resistant black powder finish coat.
Lead time: In Stock, Immediate Shipment