National Data Supply Carries a complete line of fiber optic media converters from several manufacturers including rack mount media converters, singlemode converters, multimode converters, and the new SFP converters that can deliver singlemode fiber optic signals over 100 km
National Data Supply Carries a complete line of fiber optic media converters including standalone media converters, rack mount media converters, ethernet converters, ATM OC3 fiber converters, T1/E1 Fiber Converters, DS3/E3 fiber converters from several manufacturers and have most fiber media converters and fiber mode converters in stock in one of our locations. Fiber Optic Media Converters are devices that simply receive data signals from one media, convert and transmit them to another other media. For example, media converters can convert signals transmitted on a copper cable to signals that run on fiber. Since Media Converters function as physical layer networking devices, they remain completely transparent to other networking devices and any upper-level protocol.Media Converters can function in either half-duplex or full duplex mode. Full duplex Ethernet over UTP runs at 20 or 200Mbps, while half-duplex Ethernet over UTP runs at either 10 or 100 Mbps. Full duplex Ethernet is especially valuable in linking two switches or connecting a switch to a file server. No adjustments are necessary when using either mode. A Media Converter will automatically sense which mode is in operation.
Signamax provides media conversion solutions that support data, voice, video and image transport over a wide variety of transmission media. These products convert a wide variety of data — from serial RS-232 through Standard, Fast, Gigabit Ethernet and SONET/SDH protocols. Conversions from twisted-pair copper cable, coaxial cable, multimode fiber and singlemode fiber, to other types of cable are all possible with the wide array of solutions from Signamax Connectivity Systems.
Generic Fiber Optic Media Converters- Save Hundreds of Dollars With Our Quality Media Converters
Gigabit Fiber Media Converter- Fiber Optic Media Converters
Supports multimode and single mode fiber
Plug and play unit ensures easy installation and maximum network uptime
Standard compliant with 802.3ab 1000BaseT, 802.3z 1000BaseSX, 1000BaseXL
American
Data Supply carries a complete line of fiber optic transmission products including
fiber optic modems, fiber optic transceivers, fiber optic media converters, WDM's,
T1/E1 fiber optic modems, T3/E3 fiber optic modems, fiber optic rack mount modems,
rack mount media converters, and fiber optic multiplexers, from several different
manufacturers including TC Communications, Milan, Transition networks, Allied Telesyn, Opterna (Formerly Sun Conversion), CXR,
Canoga Perkins, Versitron, TCC, Telco Systems, and others. Media Converters are devices that simply receive data signals from one media, convert and transmit them to another other media. For example, media converters can convert signals transmitted on a copper cable to signals that run on fiber. Since Media Converters function as physical layer networking devices, they remain completely transparent to other networking devices and any upper-level protocol.Media Converters can function in either half-duplex or full duplex mode. Full duplex Ethernet over UTP runs at 20 or 200Mbps, while half-duplex Ethernet over UTP runs at either 10 or 100 Mbps. Full duplex Ethernet is especially valuable in linking two switches or connecting a switch to a file server. No adjustments are necessary when using either mode. A Media Converter will automatically sense which mode is in operation.
Call (866) 342-3721 Or Click On The Chat Button At The Top Of The Page To Talk To One Of Our Representatives
Low Cost Generic Fiber Optic Media Converters Low Cost Fiber Optic Media Converters- 100 Base FX Multi-Mode to Single-Mode Converter, SC Connector (Multi-Mode2Km to Single Mode 20Km) -
10 Slot Rack Chassis With Simplex Power Supply, Designed to Work With
10 of the CXL32, CXL-B3, CXL-G2, CXL-BG, and CXL-C Series Media
Converters.-
Gigabit Media Converter,Ethernet 1000Mbps (BIDI) Bi-Directional, 20Km,
Single Mode, SC Connector (Tx:1310nm and Rx:1550nm Over One Fiber),
With Support Web Function, For Use With CXL-1600
IMC Networks Media Converters-
IMC Fiber Optic Media Converters- Network managers worldwide rely on the MediaConverter series when
converting twisted pair cabling to fiber optics. The modular
MediaConverter series is the most cost-effective, flexible solution for
everyday fiber networking in the LAN, campus network, outside plant and
MAN applications.
Complete Selection Of Fiber Optic Media Converters- Singlemode Fiber Optic Media Converters-Mulitmode Fiber Optic Media Converters- Stand Alone Fiber Optic MEdia Converters- Industrial Fiber Optic Media Converters- Gigabit Fiber Optic Media Converters-T1-E-1 Fiber Optic Media Converters-Copper To Fiber Media Converters
Signamax Managed Fiber Optic Media converters- Unmanaged Fiber Optic Media Converters -Fiber Optic Media Converters-
Signamax Fiber Optic Media Converters- Signamax provides media conversion solutions that support data, voice, video and image transport over a wide variety of transmission media. These products convert a wide variety of data — from serial RS-232 through Standard, Fast, Gigabit Ethernet and SONET/SDH protocols. Conversions from twisted-pair copper cable, coaxial cable, multimode fiber and singlemode fiber, to other types of cable are all possible with the wide array of solutions from Signamax Connectivity Systems. Complete Selection Of Fiber Optic Media Converters- Singlemode Fiber Optic Media Converters-Mulitmode Fiber Optic Media Converters- Stand Alone Fiber Optic Media Converters- Industrial Fiber Optic Media Converters- Gigabit Fiber Optic Media Converters-T1-E-1 Fiber Optic Media Converters-Copper To Fiber Media Converters
Multimode Fiber Optic Media Converters
National Data Supply Part Number
Multimode Fiber Optic Media Converter Description
Price Each-Please Call For Discounts!
Multimode Fiber Optic Media Converter
ATS102502 Fiber Media Converter
Multimode Fiber Optic Media Converter-100Base TX to FX RJ45- SC Multimode Media Converter
$69.88 each
Multimode Fiber Optic Media Converter
ATS102503 Fiber Optic Media Converter
Multimode Fiber Optic Media Converter -10/100 Fiber Media Converter SC/MM 1310nm 2Km
$ 68.88each
Multimode Fiber Optic Media Converter ATS102504 Fiber Optic Media Converter
Multimode Fiber Optic Media Converter-10/100 Fiber Media Converter ST/MM 1310nm 2Km
$68.88each
Multimode Fiber Optic Media Converter ATS102505 Fiber Optc Media Converter
Multimode Fiber Optic Media Converter-10/100 Fiber Media Converter LC/MM 1310nm 2Km
$82.88each
Singlemode Fiber Optic Media Converters
National Data Supply Part Number
SINGLEMODE Fiber Optic Media Converter Description
Price
Singlemode Fiber Optic Media Converter ATS102506 Fiber Optic Media Converter
Singlemode Fiber Optic Media Converter-10/100 Fiber Media Converter- SC/SM 1310nm 15Km
$88.88each
Singlemode Fiber Optic Media Converter ATS102507 Fiber Optic Media Converter
Singlemode Fiber Optic Media Converter-10/100 Singlemode Fiber Media Converter SC/SM 1310nm 30Km
$95.88ea
Singlemode Fiber Optic Media Converter ATS102508 Fiber Optic Media Converter
Singlemode Fiber Optic Media Converter-10/100 Singlemode Fiber Media Converter SC/SM 1310nm 40Km
$99.88 ea
Singlemode Fiber Optic Media Converter ATS102509 Fiber Optic Media Converter
Singlemode Fiber Optic Media Converter-10/100 Singlemode Media Converter ST/SM 1310nm 15Km
$ 88.88 ea
Singlemode Fiber Optic Media Converter ATS102510 Fiber Optic Media Converter
Singlemode Fiber Optic Media Converter-10/100 Fiber Media Converter ST/SM 1310nm 30Km
$99.88 ea
Singlemode Fiber Optic Media Converter ATS102511 Fiber Optic Media Converter
Singlemode Fiber Optic Media Converter-10/100 Media Converter ST/SM 1310nm 40Km
$99.88 ea
Singlemode Fiber Optic Media Converter ATS102512 Fiber Optic Media Converter
Singlemode Fiber Optic Media Converter-10/100 Fiber Media Converter LC/SM 1310nm 15Km
$ 109.88 ea
Singlemode Fiber Optic Media Converter ATS102513 Fiber Optic Media Converter
Singlemode Fiber Optic Media Converter-10/100 Fiber Media Converter LC/SM 1310nm 30Km
$ 120.88ea
Singlemode Fiber Optic Media Converter ATS102514 Fiber Optic Media Converter
Singlemode Fiber Optic Media Converter-10/100 Singlemode Fiber Media Converter LC/SM 1310nm 40Km
$ 125.88
Multimode/Singlemode Fiber Optic Media Converter ATS102514 Fiber Optic Media Converter
Multimode/ Singlemode Fiber Optic Media Converter-Gigabit Fiber Optic Media Converter- SC-MM/850nm to SC-SM/1310
TC Communications Fiber Optic Media Converters- TC Fiber Optic Media Converters- Complete Selection Of Telephone Extenders-Fiber Optic Media Converters- Singlemode Fiber Optic Media Converters-Mulitmode Fiber Optic Media Converters- Stand Alone Fiber Optic Media Converters- Industrial Fiber Optic Media Converters- Gigabit Fiber Optic Media Converters-T1-E-1 Fiber Optic Media Converters-Copper To Fiber Media Converters
Milan Media Converters-Milan Fiber Optic Media Converters- Complete Selection Of Fiber Optic Media Converters- Singlemode Fiber Optic Media Converters-Mulitmode Fiber Optic Media Converters- Stand Alone Fiber Optic MEdia Converters- Industrial Fiber Optic Media Converters- Gigabit Fiber Optic Media Converters-T1-E-1 Fiber Optic Media Converters-Copper To Fiber Media Converters
Transition Media Converters -Transition Networks Fiber Optic Media Converters-Complete Selection Of Fiber Optic Media Converters- Singlemode Fiber Optic Media Converters-Mulitmode Fiber Optic Media Converters- Stand Alone Fiber Optic Media Converters- Industrial Fiber Optic Media Converters- Gigabit Fiber Optic Media Converters-T1-E-1 Fiber Optic Media Converters-Copper To Fiber Media Converters
Fiber Optic Media Converter 10/100 Base-TX/FX Bridge Converter 2KM, SC Connector, with LFP Function (Multi-Mode)
Fiber Optic Media Converter
ATSCXL-B32S1-20
Fiber Optic Media Converter 10/100 Base-TX/FX Single Fiber (BIDI) Bi-Directional Converter 20Km, SC Connector (Tx:1310nm Rx:1550nm over One Fiber)
Fiber Optic Media Converter
ATSCXL-B33S1-20
Fiber Optic Media Converter 10/100 Base-TX/FX Single Fiber (BIDI) Bi-Directional Converter 20Km, SC Connector (Tx:1550nm Rx:1310nm over One Fiber)
Fiber Optic Media Converter
ATSCXL-MTS1121-20
Fiber Optic Media Converter 100 Base FX Multi-Mode to Single-Mode Converter, SC Connector (Multi-Mode 2Km to Single-Mode 20Km)
Fiber Optic Media Converter
ATSCXL-MTS1121-40
Fiber Optic Media Converter 101 Base FX Multi-Mode to Single-Mode Converter, SC Connector (Multi-Mode 2Km to Single-Mode 40Km)
Fiber Optic Media Converter
ATSCXL-MTS1121-60
Fiber Optic Media Converter 102 Base FX Multi-Mode to Single-Mode Converter, SC Connector (Multi-Mode 2Km to Single-Mode 60Km)
Fiber Optic Media Converter
ATSCXL-G2M1-550
Fiber Optic Media Converter Gigabit Ethernet 1000Mbps Media Converter, 500m, SC Connector (Multi-Mode)
Fiber Optic Media Converter
ATSCXL-G2S1-10
Fiber Optic Media Converter Gigabit Ethernet 1000Mbps Media Converter, 10Km, SC Connector (Single-Mode)
Fiber Optic Media Converter
ATSCXL-BG2S1-10
Fiber Optic Media Converter Gigabit Ethernet 1000Mbps (BIDI) Bi-Directional Media Converter, 10Km, SC Connector (Tx:1310nm and Rx:1550nm Over One Fiber)
Fiber Optic Media Converter
ATSCXL-BG3S1-10
Fiber Optic Media Converter Gigabit Ethernet 1000Mbps (BIDI) Bi-Directional Media Converter, 10Km, SC Connector (Tx:1550nm and Rx:1310nm Over One Fiber)
Fiber Optic Media Converter
ATSCXL-BG2S1-20
Fiber Optic Media Converter Gigabit Ethernet 1000Mbps (BIDI) Bi-Directional Media Converter, 20Km, SC Connector (Tx:1310nm and Rx:1550nm Over One Fiber)
Fiber Optic Media Converter
ATSCXL-BG3S1-20
Fiber Optic Media Converter Gigabit Ethernet 1000Mbps (BIDI) Bi-Directional Media Converter, 20Km SC Connector (Tx:1550nm and Rx:1310nm Over One Fiber)
MC102Fx
- 10/100Base-TX to 100Base-FX Converters MRV Fiber Optic Media More Fiber Optic Media ConvertersClick The MC102 fiber optic media converter product line encompasses copper-to-fiber
and fiber-to-fiber conversion units. On all of these fiber optic media converters,
the fiber port(s) allow a choice of multimode or single mode fiber, single fiber
operation, different wavelengths and power levels.The MC102F/x products are 10/100BaseTX
to 100BaseFX converters, providing external power supply (MC102F/x) and internal
power supply (MC102FI/x) options. These converters use switching technology for
the media conversion, which provides the necessary packet buffering and error
filtering, forwarding packets up to 1522 bytes. The copper port on the fiber optic
media converter allows auto-negotiation or can be forced to work at 10Mbps or
100Mbps via a hardware switch.
Fiber optic Question and Answer:
What are Media Converters
Media Converters are devices that simply receive data signals from one media, convert and transmit them to another other media. For example, media converters can convert signals transmitted on a copper cable to signals that run on fiber. Since Media Converters function as physical layer networking devices, they remain completely transparent to other networking devices and any upper-level protocols.
More about Media Converters
Since a media converter is a physical layer networking device, it:
simply converts data from one medium to another on a bit-by-bit basis
doesn't look at addresses or other data
doesn't recognize or react to collisions
Therefore a media converter is different from a bridge, a switch, or a repeater.
A stand alone media converter is a small device with two media-dependent interfaces and a power supply. It can be installed almost anywhere in a network. The style of connector depends on the selection of media to be converted by the unit. In a Fast Ethernet environment, a 100Base-TX to 100Base-FX Media Converter connects a 100Base-TX twisted-pair device to a 100Base-FX compliant single or multimode fiber port that has a fiber-optic connector. In a Gigabit Ethernet, a Media Converter is commonly deployed to convert multimode to single-mode fiber.
Media Converters can function in either half-duplex or full duplex mode. Full duplex Ethernet over UTP runs at 20 or 200Mbps, while half-duplex Ethernet over UTP runs at either 10 or 100 Mbps. Full duplex Ethernet is especially valuable in linking two switches or connecting a switch to a file server. No adjustments are necessary when using either mode. A Media Converter will automatically sense which mode is in operation.
Fiber
Driver® copper to fiber media converter modules from MRV make it easy to merge
legacy copper network elements with new or existing fiber optic infrastructure,
allowing LAN communications to be extended to distances of up to 130 km or more.
In addition, the Multimode Extender (MX) technology found in select Fiber Driver
products breaks the transmission barrier of multimode fiber with link distances
of up to 10 km.
Copper
to multimode and copper to single mode solutions are available for Ethernet, Fast
Ethernet, Gigabit Ethernet and Copper Gigabit Ethernet, OC-3/STM-1, DS3 and E3.
(Additional Ethernet copper to fiber solution are provided by our signal repeater
and switch modules.
The
Fiber Driver® collection of Multimode to Single Mode converters allow network
managers to connect between Multimode and Single Mode fiber. Conversion to Single
Mode fiber can extend the transmission distance to over 100 km. Protocols covered
by this group of modules include SONET OC-3 and Gigabit Ethernet.
Multimode
to Single Fiber Single Mode modules can be found in the group of Single Fiber
modules.
The
EM316T1 and the EM316E1 modules of the Fiber Driver® family are designed to
extend the distance and transmission reliability of T1 (1.544Mbps) or E1 (2.048Mbps)
traffic. These units convert the electrical signals to optical signals and transmit
them over distances of up to 10 km on Multimode fiber, or distances of up to 100
km on Singlemode fiber. The EM316T1 and EM316E1 are transparent to the framing
format, and support AMI or B8ZS (T1) and HDB3 (E1) line codes, respectively. They
include an internal elastic buffer to remove jitter from the transmitted data.
Six LED indicators aid in monitoring and trouble-shooting this module. A management
agent is incorporated on the module to enable management in conjunction with the
Fiber Driver EM316NM management card. As part of the Fiber Driver family, the
EM316T1 and EM316E1 modules fit in all Fiber Driver chassis types, support local
and remote loopback tests, and can be used to interconnect between any T1 or E1
devices. Among the types of T1/E1 devices that can be connected by these modules
are PBXs, multiplexers, video CODECS, routers, network servers, and ATM/frame
relay switches. Benefits include extended distances, improved quality of transmission,
better security, remote management capability, and high density.
The
MC102FR is a 100BaseFX repeater, targeted for fiber media conversion (MM
to SM), and used for infrastructure adaptation. It is also used for long distance
communications, via repeater chaining. Since the MC102FR performs 3R (retiming,
reshaping, re-amplification) signal regeneration, units may be placed one after
another without compromising signal quality.
The
MC102FRC is a 100BaseTX to 100BaseFX repeater, targeted for applications
requiring long frames (more than 1522 bytes), such as those used by MPLS encapsulation.
The MC102FRC also provides an Automatic Link Integrity (ALI) feature, which automatically
shuts down the copper link in case of fiber link failure.
MC102T
Fiber Optic Media Converter protocol transparent media converters provide media
adaptation signal regeneration up to 100Km for any protocol. Two types of converters
are available, for protocols up to 200Mbps rates (FE, STM1, ESCON, E3, etc.) and
up to 1.25Gbps (GE, FC, STM4).
The
MC102GFiber Optic Media Converter products are 1Gbps signal repeaters
for Ethernet or Fiber Channel (1Gbps) applications. The MC102G units provide fiber-to-fiber
conversion (MM to SM) for infrastructure adaptation. Additionally, since the MC102G
provides 3R signal regeneration, networks built by chaining these units can reach
distances longer than 100Km without compromising signal quality.
The
MS104 products are 4-port switches, which are targeted for SOHO, FTTH, and other
applications where a few 10/100BaseTX devices need to be concentrated and connected
to the network by fiber connections. The family members differ from each other
by the type of fiber optic ports connection they accommodate, with a choice of
multimode fiber, singlemode fiber, single fiber operation, different wavelengths
and power levels as well as different connector types (DSC, SC and MTRJ).
The
MS105 products are 5-port switches, which are targeted for SOHO, FTTH, and other
applications where a few 10/100BaseTX devices need to be concentrated and connected
to the network by fiber connections. The family members differ from each other
by the type of fiber optic ports connection they accommodate, with a choice of
multimode fiber, singlemode fiber, single fiber operation, different wavelengths
and power levels as well as different connector types (DSC, SC and MTRJ).
The
MM04 product line is a 4 port E1 or T1 multiplexer/demultiplexer that transmits
over a fiber optic link. The products are standalone (1U), 19" rack mountable
(half-size devices). The optical fiber interface is available in a number of standard
fiber connections and has optional redundant optical connections. The chassis
is available with universal AC power supply (100-240v) or DC power supply (36-60v)
and and in option of redundant power supply.
MM04
devices support four (4) link interfaces and are available for E1 or T1 configurations
with connections for RJ-48 (E1/T1 balanced). In long haul mode the interfaces
possess usable receive sensitivity of 0 dB to -43 dB for E1 and 0 dB to -36 dB
for T1 which allow the device to operate with 0.63 mm (22AWG) cables at distances
up to 2.5 km (E1) and 6000 feet (T1).
Each
E1/T1 port is designed to meet regulatory compliant solutions such as for circuit
protection against surges and AC lightning, which is essential for long haul E1/T1
lines
The
MM04 product line is a 4 port E1 or T1 multiplexer/demultiplexer that transmits
over a fiber optic link. The products are standalone (1U), 19" rack mountable
(half-size devices). The optical fiber interface is available in a number of standard
fiber connections and has optional redundant optical connections. The chassis
is available with universal AC power supply (100-240v) or DC power supply (36-60v)
and and in option of redundant power supply.
MM04
devices support four (4) link interfaces and are available for E1 or T1 configurations
with connections for RJ-48 (E1/T1 balanced). In long haul mode the interfaces
possess usable receive sensitivity of 0 dB to -43 dB for E1 and 0 dB to -36 dB
for T1 which allow the device to operate with 0.63 mm (22AWG) cables at distances
up to 2.5 km (E1) and 6000 feet (T1).
The
Fiber Driver® Gigabit Multimode Extender applies unique technology that allows
the transmission of high-speed signals over Multimode fibers to distances much
longer than the standard. This allows the use of high-speed backbone protocols
over fiber that was originally used for FDDI.
Fiber
optic cables for FDDI applications were typically laid in 2 km increments, since
that was the distance limit for FDDI and Fast Ethernet on Multimode fiber. But
with today's new high-speed backbone protocols, Multimode fiber's physical characteristics
result in a maximum distance of 550 meters,.
The
Fiber Driver Gigabit Multimode Extender offes a solution that is interoperable
with all standard Gigabit Ethernet equipment. It carries Gigabit Ethernet data
on existing Multimode fiber (FDDI graded) to distances of up to 2 km guaranteed.
Depending on the quality of the fiber, links of up to 6 km are possible.
The
Fiber Driver® Optical Protection Switch from MRV (model number EM316OSSH)
makes creating a redundant optical link easier and more affordable than ever before.
Designed to provide full path protection for mission critical networks, the module
is capable of automatically switching between a primary and secondary (backup)
link in 10 ms or less in the event of a fiber cut or transponder failure.
As
an all optical device performing no optical-electrical-optical (OEO) conversion,
the EM316OSSH remains protocol independent and accepts all wavelengths from 1260
nm to 1630 nm, making it suitable for virtually any application, including WDM
path protection. The module can provide 1+1 protection in resilient point-to-point
or Optical Unidirectional Path Switched Ring (O-UPSR) deployments.
The
Fiber Driver® family includes three types of switch modules: three-, four-,
and six-port Ethernet/Fast Ethernet switches. Switch modules are used to link
between 10Mbps and 100Mbps or Half to Full Duplex mode. Switch modules offer a
combination of 10/100Base-TX ports and 100Base-FX ports. They separate between
Ethernet collision domains and filter local traffic from propagating to the rest
of the network.
The
Fiber Driver® familys Single Fiber modules use unique technologies,
which provide the ability to combine transmit (TX) and receive (RX) signals onto
a single fiber strand. This effectively doubles the available fiber in a network,
and eliminates the need for additional fiber installation. The Fiber Driver Single
Fiber modules employs Single wavelength bi-directional technology in order to
combine the TX and RX on the single strand.
Splitter/Combiner
technology provides the ability to propagate two signals, transmit (TX) and receive
(RX), over a single fiber strand using the same wavelength. The Fiber Driver®
Splitter/Combiner modules, and Splitter/Combiner cables for GBICs and SFPs effectively
double the availability of fiber in a network. They are fully passive devices
that operate at a specific wavelength, and remain protocol and network transparent.
A
pair of Splitter/Combiners add a power loss of only up to 7 dB for SM fiber and
9 dB for MM fiber. Angled Polished Connectors (APCs) are used at the link connections
to eliminate cross-talk.
The
Fiber Driver® E1 Fiber Multiplexer from MRV Communications transmits four
E1 data channels across a fiber optic trunk in a Point-to-Point (PtP) configuration.
Each line interface consists of a HDB3 encoder/decoder, and a receiver with equalizer
for reliable data and clock recovery. The device also includes a crystal-less
jitter attenuator which, depending on system requirements, can be set in the transmit
(TX) or receive (RX) path. Line distances from 0 to 100m are supported. Line protection
is designed to meet Telecordia GR-1089 standards. The Fiber Driver E1 Fiber Mux
is G.703 interface and G.704 framing compliant.
The
Fiber Driver® T1 Fiber Multiplexer from MRV Communications transmits four
T1 data channels across a fiber optic trunk in a Point-to-Point (PtP) configuration.
Each line interface consists of a B8ZS, or AMI encoder/decoder as applicable,
and a receiver with equalizer for reliable data and clock recovery. The device
also includes a crystal-less jitter attenuator which, depending on system requirements,
can be set in the transmit (TX) or receive (RX) path. Line distances from 0 to
100 m are supported. Line protection is designed to meet Telecordia GR-1089.
WDM22
E1
/ T1 & Fast/Gigabit Ethernet over a Single Fiber
Combining
Fiber Driver® WDM and Splitter/Combiner technology, the E1 and T1 WDM22 modules
combine separate voice and data channels onto a single strand of fiber. The EM316FE1SF
and EM316GE1SF models merge E1 (2.048Mbs) and Ethernet (100 Mbps and 1000 Mbps
respectively), while the EM316FT1SF and EM316GT1SF combine T1 (1.544Mbs) and Ethernet
(100 Mbps or 1000 Mbps). The units effectively quadruple available fiber capacity.
What would normally require separate dual-fiber links, one for an E1/T1 connection
and one for an Ethernet connection, instead takes only a single strand of fiber.
The
EM316T1 and the EM316E1 modules of the Fiber Driver® family are designed to
extend the distance and transmission reliability of T1 (1.544Mbps) or E1 (2.048Mbps)
traffic. These units convert the electrical signals to optical signals and transmit
them over distances of up to 10 km on Multimode fiber, or distances of up to 100
km on Singlemode fiber. The EM316T1 and EM316E1 are transparent to the framing
format, and support AMI or B8ZS (T1) and HDB3 (E1) line codes, respectively
EM316PAMULC,
EM316WP, PAWLCSC - Passive Mux/Demux
2-, 4- and 8-channel modules, and 2-channel
cables
The
Fiber Driver® Passive Mux/Demux module and cables deliver the benefits of
a Wave Division Multiplexer in a fully passive solution. With matching units placed
at each end of an optical link, 2 or more Full Duplex data channels can be combined
and transmitted over a Single Mode fiber trunk.
Click
On Any Of the Links At Left For More Product Information
American
Data Supply carries a complete line of fiber optic transmission products from
several different manufacturers including Allied Telesyn, Opterna (Formerly Sun
Conversion), CXR, Canoga Perkins, Versitron, TCC, Telco Systems, and others. Our
General products include Fiber Optic Modems & Multiplexers; Fiber Optic Data/Telephone
Multiplexers; Fiber Ethernet Switches, Transceivers & Media Converters and
Ethernet/Fiber/RS-232 Telephone Extenders. Specialty products include Industrial-Hardened
Ethernet and Multi-Drop Fiber Modems & Multiplexers for SCADA, Traffic Control,
Security & Process Control applications. Fiber Optic Modems are often used
to link various process control systems in manufacturing plants, refineries, etc.
It is also used to connect Remote Terminal Units to SCADA hosts or controllers
in Utility environments.
American
Data Supply is now a partner of MRV Communications- please feel free to visit
their site for information while we are building up their product section on our
web site .