Commercial Grade BNC Compression Connectors -
Suitable for Coaxial Broadband Networks Used in Video, Data and Telephony Applications with Standard, Tri-Shield or Quad-Shield Cable -
360° Radial Compression -
Precision Machined Annealed-Brass Construction -
Anti-Corrosion Nickel-Plated Finish -
Quick-Easy Installation 1/4"-1/4" Cable Preparation -
Termination Tools: Cable Stripper: 204-205; Compression Tool: 204-036
F PermaSeal-II™ Connectors
Ultra-High Performance F Compression Connectors –
Patented Single-Piece Elegant Design –
Suitable for Coaxial Broadband Networks Used in Video, Data and Telephony Applications Using Standard, Tri-Shield or Quad-Shield Cable –
Fail-Safe Environmental Seal Protection –
Internal Neoprene O-Ring Sealed – 360° Radial Seal –
Ridge-Patterned Internal Sleeve –
Oversize Easy-Grip 7.0mm Wide 7/16˝ Hex Free-Spinning Nut –
Precision Machined Annealed CDA360 Brass –
Anti-Corrosion Nickel-Plated –
Impressive Return Loss >-30dB @ 3GHz typical –
Cable Retention 70-lbs min. > ANSI/SCTE 99 2004 –
Quick-Easy Installation – 1/4˝ -1/4˝ Cable Preparation –
Color-Coded Collar Rings for Easy Cable-Type ID –
Termination Tools: Cable Stripper: 204-205; Compression Tools: 204-001, 204-036 (Use 204-031 for 200-021)
200-004
F RG59 PermaSeal-II™ Red Band .
Ultra-High Performance F Compression Connectors –
Patented Single-Piece Elegant Design –
Suitable for Coaxial Broadband Networks Used in Video, Data and Telephony Applications Using Standard, Tri-Shield or Quad-Shield Cable –
Fail-Safe Environmental Seal Protection –
Internal Neoprene O-Ring Sealed – 360° Radial Seal –
Ridge-Patterned Internal Sleeve –
Oversize Easy-Grip 7.0mm Wide 7/16˝ Hex Free-Spinning Nut –
Precision Machined Annealed CDA360 Brass –
Anti-Corrosion Nickel-Plated –
Impressive Return Loss >-30dB @ 3GHz typical –
Cable Retention 70-lbs min. > ANSI/SCTE 99 2004 –
Quick-Easy Installation – 1/4˝ -1/4˝ Cable Preparation –
Color-Coded Collar Rings for Easy Cable-Type ID –
Termination Tools: Cable Stripper: 204-205; Compression Tools: 204-001, 204-036 (Use 204-031 for 200-021)
200-006
F RG6 PermaSeal-II™ Yellow Band.
Ultra-High Performance F Compression Connectors –
Patented Single-Piece Elegant Design –
Suitable for Coaxial Broadband Networks Used in Video, Data and Telephony Applications Using Standard, Tri-Shield or Quad-Shield Cable –
Fail-Safe Environmental Seal Protection –
Internal Neoprene O-Ring Sealed – 360° Radial Seal –
Ridge-Patterned Internal Sleeve –
Oversize Easy-Grip 7.0mm Wide 7/16˝ Hex Free-Spinning Nut –
Precision Machined Annealed CDA360 Brass –
Anti-Corrosion Nickel-Plated –
Impressive Return Loss >-30dB @ 3GHz typical –
Cable Retention 70-lbs min. > ANSI/SCTE 99 2004 –
Quick-Easy Installation – 1/4˝ -1/4˝ Cable Preparation –
Color-Coded Collar Rings for Easy Cable-Type ID –
Termination Tools: Cable Stripper: 204-205; Compression Tools: 204-001, 204-036 (Use 204-031 for 200-021)
200-007
F RG6-Quad PermaSeal-II™ Blue Band.
Ultra-High Performance F Compression Connectors –
Patented Single-Piece Elegant Design –
Suitable for Coaxial Broadband Networks Used in Video, Data and Telephony Applications Using Standard, Tri-Shield or Quad-Shield Cable –
Fail-Safe Environmental Seal Protection –
Internal Neoprene O-Ring Sealed – 360° Radial Seal –
Ridge-Patterned Internal Sleeve –
Oversize Easy-Grip 7.0mm Wide 7/16˝ Hex Free-Spinning Nut –
Precision Machined Annealed CDA360 Brass –
Anti-Corrosion Nickel-Plated –
Impressive Return Loss >-30dB @ 3GHz typical –
Cable Retention 70-lbs min. > ANSI/SCTE 99 2004 –
Quick-Easy Installation – 1/4˝ -1/4˝ Cable Preparation –
Color-Coded Collar Rings for Easy Cable-Type ID –
Termination Tools: Cable Stripper: 204-205; Compression Tools: 204-001, 204-036 (Use 204-031 for 200-021)
200-021
F RG11 PermaSeal-II™.
Ultra-High Performance F Compression Connectors –
Patented Single-Piece Elegant Design –
Suitable for Coaxial Broadband Networks Used in Video, Data and Telephony Applications Using Standard, Tri-Shield or Quad-Shield Cable –
Fail-Safe Environmental Seal Protection –
Internal Neoprene O-Ring Sealed – 360° Radial Seal –
Ridge-Patterned Internal Sleeve –
Oversize Easy-Grip 7.0mm Wide 7/16˝ Hex Free-Spinning Nut –
Precision Machined Annealed CDA360 Brass –
Anti-Corrosion Nickel-Plated –
Impressive Return Loss >-30dB @ 3GHz typical –
Cable Retention 70-lbs min. > ANSI/SCTE 99 2004 –
Quick-Easy Installation – 1/4˝ -1/4˝ Cable Preparation –
Color-Coded Collar Rings for Easy Cable-Type ID –
Termination Tools: Cable Stripper: 204-205; Compression Tools: 204-001, 204-036 (Use 204-031 for 200-021)
Mini RG59 5-Wire Cable
Maximum Performance Cables for Home Theater Use –
Ideal for HDTV Sets, DVD Players/Recorders and Digital Set-Top Boxes –
Space-Saving Design for Tight Applications –
Sweep Tested to 3GHz –
25 AWG Mini RG59/U Cable, Five Solid or Stranded Copper Conductors –
Gas Injected Polyethylene Dielectric –
Aluminum-Polyester Foil Shield, 100% Coverage –
Stranded Copper Braid, 95% Coverage –
Red, Green, Blue, Yellow, White PVC Insulation Jackets –
Flame Retardant PVC Black Outer Jacket –
UL Listed – NEC Type CM
200-924
250´ Mini RG59 5-Wire, Solid .
Maximum Performance Cables for Home Theater Use –
Ideal for HDTV Sets, DVD Players/Recorders and Digital Set-Top Boxes –
Space-Saving Design for Tight Applications –
Sweep Tested to 3GHz –
25 AWG Mini RG59/U Cable, Five Solid or Stranded Copper Conductors –
Gas Injected Polyethylene Dielectric –
Aluminum-Polyester Foil Shield, 100% Coverage –
Stranded Copper Braid, 95% Coverage –
Red, Green, Blue, Yellow, White PVC Insulation Jackets –
Flame Retardant PVC Black Outer Jacket –
UL Listed – NEC Type CM
200-925
500´ Mini RG59 5-Wire, Stranded .
Maximum Performance Cables for Home Theater Use –
Ideal for HDTV Sets, DVD Players/Recorders and Digital Set-Top Boxes –
Space-Saving Design for Tight Applications –
Sweep Tested to 3GHz –
25 AWG Mini RG59/U Cable, Five Solid or Stranded Copper Conductors –
Gas Injected Polyethylene Dielectric –
Aluminum-Polyester Foil Shield, 100% Coverage –
Stranded Copper Braid, 95% Coverage –
Red, Green, Blue, Yellow, White PVC Insulation Jackets –
Flame Retardant PVC Black Outer Jacket –
UL Listed – NEC Type CM
Thread Protectors
Environmentally seals F-ports to F-connectors with coaxial cable –
Compresses to form seal when F-connectors are tightened onto 3/8" threaded ports
200-958BK
F-Thread Port Protector, approx. 0.25" long.
Environmentally seals F-ports to F-connectors with coaxial cable –
Compresses to form seal when F-connectors are tightened onto 3/8" threaded ports
200-959BK
F-Thread Port Protector, approx. 0.41" long.
Environmentally seals F-ports to F-connectors with coaxial cable –
Compresses to form seal when F-connectors are tightened onto 3/8" threaded ports
F TaperSeal™ Connectors
Commercial Grade Compresssion Connectors –
Suitable for Coaxial Broadband Networks Used in Video, Data and Telephony Applications with Standard Shield Cable Types –
High-Radiation Leakage Reduction –
Conical Tapered Swedge Termination –
Precision Machined Annealed-Brass Construction Anti-Corrosion Bright-Acid Tin Plated –
Internal Neoprone O-Ring Weather Sealed –
7/16˝ Hex 4.3mm Wide Heavy Duty Easy-Grip Nut
200-017
F TaperSeal™ RG59 Universal Plug.
Commercial Grade Compresssion Connectors –
Suitable for Coaxial Broadband Networks Used in Video, Data and Telephony Applications with Standard Shield Cable Types –
High-Radiation Leakage Reduction –
Conical Tapered Swedge Termination –
Precision Machined Annealed-Brass Construction Anti-Corrosion Bright-Acid Tin Plated –
Internal Neoprone O-Ring Weather Sealed –
7/16˝ Hex 4.3mm Wide Heavy Duty Easy-Grip Nut
200-029
F TaperSeal™ RG6 Universal Plug.
Commercial Grade Compresssion Connectors –
Suitable for Coaxial Broadband Networks Used in Video, Data and Telephony Applications with Standard Shield Cable Types –
High-Radiation Leakage Reduction –
Conical Tapered Swedge Termination –
Precision Machined Annealed-Brass Construction Anti-Corrosion Bright-Acid Tin Plated –
Internal Neoprone O-Ring Weather Sealed –
7/16˝ Hex 4.3mm Wide Heavy Duty Easy-Grip Nut
F Crimp Connectors
Commercial Grade F Drop Connectors Suitable for Coaxial Broadband Networks –
Used in Video, Data and Telephony Applications –
Reliable easy-crimp annealed-brass construction prevents rupturing or cracking –
Anti-Corrosion Bright Acid Tin or Nickel Plating
200-022
F Crimp RG11 Connector –
One-Piece Attached Crimp Ring –
Bright Acid Tin-Plated Brass –
Suitable for Use with RG11 Coaxial Cable –
Crimp Termination Tool: 204-009.
200-027
F Crimp Universal RG6 Connector –
Use with standard or tri-shield cable –
Annealed Brass 3-Piece Construction –
Anti-Corrosion Nickel-Plated Finish –
Termination Tools: Coaxial Cable Strippers: 204-200, 204-202, 204-205; Crimp Termination Tool: 204-009.
200-033
F Crimp RG6-Quad Connector –
Use with quad-shield cable –
Annealed Brass 1-Piece Construction –
Anti-Corrosion Nickel-Plated Finish –
Termination Tools: Coaxial Cable Strippers: 204-200, 204-202, 204-205; Crimp Termination Tool: 204-009.
200-034
F Crimp RG6-Plenum Connector –
Use with plenum cable –
Annealed Brass 1-Piece Construction –
Anti-Corrosion Nickel-Plated Finish –
Termination Tools: Coaxial Cable Strippers: 204-200, 204-202, 204-205; Crimp Termination Tool: 204-009.
F Series Connectors
Commercial Grade F Series Connectors –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-015
F Plug Crimp RG6 1/4" Ring.
Commercial Grade F Series Connectors –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-018
1/4" Ring for 200-010 Connector –
100 Count Bag.
Commercial Grade F Series Connectors –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-020
F Plug Crimp RG59 Attached Ring.
Commercial Grade F Series Connectors –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-025
F Plug Crimp RG6 Attached Ring.
Commercial Grade F Series Connectors –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-030
F Plug Crimp RG59 1/2" Barrel.
Commercial Grade F Series Connectors –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-031
F Plug Crimp RG59 1/2" Barrel – Gold.
Commercial Grade F Series Connectors –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-035
F Plug Crimp RG6 1/2" Barrel.
Commercial Grade F Series Connectors –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-036
F Plug Crimp RG6 1/2" Barrel – Gold.
Commercial Grade F Series Connectors –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-037
F Plug Crimp RG6 O-Ring Seal –
2-Piece Die-Cast Construction –
Anti-Corrosion Chromate Plating.
200-038
F Plug Crimp RG6 Weatherproof –
O-Ring Water Seal –
Silicone-Gel Compound Seal –
Precision Machined Brass –
Anti-Corrosion Chromate Plating.
200-039
F Plug Twist-On for RG6.
Commercial Grade F Series Connectors –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-040
F Plug Twist-On for RG59.
Commercial Grade F Series Connectors –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-041
F Plug Twist-On for RG59 – Gold.
Commercial Grade F Series Connectors –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-043
F Plug Twist-On for RG6 – Gold.
Commercial Grade F Series Connectors –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
F Series Adapters
Commercial Grade F Series Adapters –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-045
RCA Jack to F Plug.
Commercial Grade F Series Adapters –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-050
F Coupler Jack-Jack.
Commercial Grade F Series Adapters –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-051
F Coupler Jack-Jack – Gold Plated.
Commercial Grade F Series Adapters –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-053
F Coupler Jack-Jack Panel Mount
with Mounting Nut and Washer.
Commercial Grade F Series Adapters –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-055
F Jack Panel Receptacle.
Commercial Grade F Series Adapters –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-056
3/8" Nut-Washer for F Fittings.
Commercial Grade F Series Adapters –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-075
F Terminator 75" 5% 1/2W.
Commercial Grade F Series Adapters –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-100
F Coupler Plug-Plug.
Commercial Grade F Series Adapters –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-103
F Jack to F-Quick Plug.
Commercial Grade F Series Adapters –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-104
F Jack to F-Quick Plug – Gold Plated.
Commercial Grade F Series Adapters –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-107
F Angle Adapter Jack-Plug.
Commercial Grade F Series Adapters –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-108
BNC Jack to F Plug.
Commercial Grade F Series Adapters –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
200-117
F Jack to 3.5mm Mono Plug.
Commercial Grade F Series Adapters –
Suitable for Coaxial Networks Used in Video, Data and Telephony Applications –
Nickel- or Gold-Plated Brass/Zinc Construction
F Series Premium Adapters
High-Performance F Splices and L-Adapters –
Engineered for High-Frequency Broadband Network –
and Distribution System Applications to 3GHz –
Precision Machined CDA360 Brass Construction –
Thick Nickel-Plated for Corrosion-Free Service Life –
Flat-ended small-aperture F ports meets SCTE IPS-SP-407 for improved contact and high return loss –
360° round seizing center contact provides high spring-tension for repeat insertions –
High 8-Ampere DC Continuous Current Capacity –
Insertion Loss 0.20dB max.
200-057
1 GHz F81 Splice – 1" Long –
Red Insulator – Phosphor Bronze Contact –
Return Loss -20dB minimum @ 1GHz.
High-Performance F Splices and L-Adapters –
Engineered for High-Frequency Broadband Network –
and Distribution System Applications to 3GHz –
Precision Machined CDA360 Brass Construction –
Thick Nickel-Plated for Corrosion-Free Service Life –
Flat-ended small-aperture F ports meets SCTE IPS-SP-407 for improved contact and high return loss –
360° round seizing center contact provides high spring-tension for repeat insertions –
High 8-Ampere DC Continuous Current Capacity –
Insertion Loss 0.20dB max.
200-058
2.5 GHz F81 Splice – 1" Long –
Blue Insulator – Phosphor Bronze Contact –
Return Loss -24dB minimum @ 2.5GHz.
High-Performance F Splices and L-Adapters –
Engineered for High-Frequency Broadband Network –
and Distribution System Applications to 3GHz –
Precision Machined CDA360 Brass Construction –
Thick Nickel-Plated for Corrosion-Free Service Life –
Flat-ended small-aperture F ports meets SCTE IPS-SP-407 for improved contact and high return loss –
360° round seizing center contact provides high spring-tension for repeat insertions –
High 8-Ampere DC Continuous Current Capacity –
Insertion Loss 0.20dB max.
200-059
3 GHz F81 Splice – 1" Long –
Green Insulator – Beryllium-Copper Pin –
Return Loss -30dB minimum @ 3GHz.
High-Performance F Splices and L-Adapters –
Engineered for High-Frequency Broadband Network –
and Distribution System Applications to 3GHz –
Precision Machined CDA360 Brass Construction –
Thick Nickel-Plated for Corrosion-Free Service Life –
Flat-ended small-aperture F ports meets SCTE IPS-SP-407 for improved contact and high return loss –
360° round seizing center contact provides high spring-tension for repeat insertions –
High 8-Ampere DC Continuous Current Capacity –
Insertion Loss 0.20dB max.
200-106
2.5 GHz F Angle Adapter –
Blue Insulator – Phosphor Bronze Contact –
Return Loss -24dB minimum @ 2.5GHz.
High-Performance F Splices and L-Adapters –
Engineered for High-Frequency Broadband Network –
and Distribution System Applications to 3GHz –
Precision Machined CDA360 Brass Construction –
Thick Nickel-Plated for Corrosion-Free Service Life –
Flat-ended small-aperture F ports meets SCTE IPS-SP-407 for improved contact and high return loss –
360° round seizing center contact provides high spring-tension for repeat insertions –
High 8-Ampere DC Continuous Current Capacity –
Insertion Loss 0.20dB max.
Commercial Grade BNC Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Brass/Zinc Construction –
Gold-Plated Contacts – Delrin Insulator
200-122
BNC Plug Twist-On for RG6.
Commercial Grade BNC Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Brass/Zinc Construction –
Gold-Plated Contacts – Delrin Insulator
200-131
BNC Plug Crimp 2pc RG59.
Commercial Grade BNC Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Brass/Zinc Construction –
Gold-Plated Contacts – Delrin Insulator
200-134
BNC Plug Crimp 2pc RG58.
Commercial Grade BNC Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Brass/Zinc Construction –
Gold-Plated Contacts – Delrin Insulator
200-135
BNC Jack Crimp 2pc RG59/62.
Commercial Grade BNC Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Brass/Zinc Construction –
Gold-Plated Contacts – Delrin Insulator
200-136
BNC Jack Crimp 2pc RG58.
Commercial Grade BNC Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Brass/Zinc Construction –
Gold-Plated Contacts – Delrin Insulator
200-137
BNC Jack Crimp 2pc RG59/62 Plenum.
Commercial Grade BNC Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Brass/Zinc Construction –
Gold-Plated Contacts – Delrin Insulator
200-138
BNC Plug Crimp 2pc RG59 Plenum.
Commercial Grade BNC Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Brass/Zinc Construction –
Gold-Plated Contacts – Delrin Insulator
200-139
BNC Plug Crimp 2pc RG6.
Commercial Grade BNC Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Brass/Zinc Construction –
Gold-Plated Contacts – Delrin Insulator
200-140
BNC Plug Crimp 3pc RG59/62 Plenum.
Commercial Grade BNC Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Brass/Zinc Construction –
Gold-Plated Contacts – Delrin Insulator
200-141
BNC Plug Crimp 3pc RG6.
Commercial Grade BNC Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Brass/Zinc Construction –
Gold-Plated Contacts – Delrin Insulator
200-142
BNC Plug Twist-On for RG59/62.
Commercial Grade BNC Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Brass/Zinc Construction –
Gold-Plated Contacts – Delrin Insulator
200-143
BNC Plug Crimp 3pc RG59/62.
Commercial Grade BNC Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Brass/Zinc Construction –
Gold-Plated Contacts – Delrin Insulator
200-144
BNC Plug Clamp for RG59/62.
Commercial Grade BNC Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Brass/Zinc Construction –
Gold-Plated Contacts – Delrin Insulator
200-145
BNC Plug Crimp 3pc for RG58.
Commercial Grade BNC Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Brass/Zinc Construction –
Gold-Plated Contacts – Delrin Insulator
200-146
BNC Plug Twist-On for RG58.
Commercial Grade BNC Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Brass/Zinc Construction –
Gold-Plated Contacts – Delrin Insulator
200-147
BNC Plug Crimp 3pc RG58A/C –
Includes PVC and Plenum Ferrules.
Commercial Grade BNC Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Brass/Zinc Construction –
Gold-Plated Contacts – Delrin Insulator
200-148
BNC Jack Isolated Panel Mount.
Commercial Grade BNC Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Brass/Zinc Construction –
Gold-Plated Contacts – Delrin Insulator
BNC Series Adapters
Commercial Grade BNC Series Adapters –
Suitable for Video and Headend Applications
200-130
F Jack to BNC Plug.
Commercial Grade BNC Series Adapters –
Suitable for Video and Headend Applications
200-132
UHF Jack to BNC Plug.
Commercial Grade BNC Series Adapters –
Suitable for Video and Headend Applications
200-133
BNC Coupler Plug-Plug.
Commercial Grade BNC Series Adapters –
Suitable for Video and Headend Applications
200-150
BNC Tee Adapter Jack-Jack-Jack.
Commercial Grade BNC Series Adapters –
Suitable for Video and Headend Applications
200-155
BNC Tee Adapter Jack-Plug-Jack.
Commercial Grade BNC Series Adapters –
Suitable for Video and Headend Applications
200-158
BNC Angle Adapter Jack-Plug.
Commercial Grade BNC Series Adapters –
Suitable for Video and Headend Applications
200-160
BNC Coupler Jack-Jack.
Commercial Grade BNC Series Adapters –
Suitable for Video and Headend Applications
200-165
BNC Coupler Jack-Jack Panel .
Commercial Grade BNC Series Adapters –
Suitable for Video and Headend Applications
200-173
RCA Jack to BNC Plug.
Commercial Grade BNC Series Adapters –
Suitable for Video and Headend Applications
200-175
BNC Terminator 50" 5% 1/2W.
Commercial Grade BNC Series Adapters –
Suitable for Video and Headend Applications
200-177
BNC Terminator 75" 5% 1/2W.
Commercial Grade BNC Series Adapters –
Suitable for Video and Headend Applications
200-179
BNC Terminator 93" 5% 1/2W.
Commercial Grade BNC Series Adapters –
Suitable for Video and Headend Applications
200-834
Mini-UHF Jack to BNC Plug.
Commercial Grade BNC Series Adapters –
Suitable for Video and Headend Applications
UHF Series Connectors
Commercial Grade UHF Series Connectors –
Nickel-Plated Machined Brass Construction –
Nickel-Plated Contacts – Delrin Insulator
200-190
UHF Jack Panel Receptacle .
Commercial Grade UHF Series Connectors –
Nickel-Plated Machined Brass Construction –
Nickel-Plated Contacts – Delrin Insulator
200-192
UHF Plug Solder-On for RG8.
Commercial Grade UHF Series Connectors –
Nickel-Plated Machined Brass Construction –
Nickel-Plated Contacts – Delrin Insulator
200-193
UHF Plug Crimp-On for RG59.
Commercial Grade UHF Series Connectors –
Nickel-Plated Machined Brass Construction –
Nickel-Plated Contacts – Delrin Insulator
UHF Series Adapters
Commercial Grade UHF Series Adapters –
Nickel-Plated Machined Brass Construction –
Nickel-Plated Contacts – Delrin Insulator
200-189
RG59 Reducer for 200-192.
Commercial Grade UHF Series Adapters –
Nickel-Plated Machined Brass Construction –
Nickel-Plated Contacts – Delrin Insulator
200-191
RG58 Reducer for 200-192 .
Commercial Grade UHF Series Adapters –
Nickel-Plated Machined Brass Construction –
Nickel-Plated Contacts – Delrin Insulator
200-194
F Jack to UHF Plug.
Commercial Grade UHF Series Adapters –
Nickel-Plated Machined Brass Construction –
Nickel-Plated Contacts – Delrin Insulator
200-195
BNC Jack to UHF Plug.
Commercial Grade UHF Series Adapters –
Nickel-Plated Machined Brass Construction –
Nickel-Plated Contacts – Delrin Insulator
200-197
UHF Angle Adapter Jack-Plug.
Commercial Grade UHF Series Adapters –
Nickel-Plated Machined Brass Construction –
Nickel-Plated Contacts – Delrin Insulator
200-198
UHF Coupler Jack-Jack.
Commercial Grade UHF Series Adapters –
Nickel-Plated Machined Brass Construction –
Nickel-Plated Contacts – Delrin Insulator
200-199
UHF Tee Adapter Jack-Plug-Jack.
Commercial Grade UHF Series Adapters –
Nickel-Plated Machined Brass Construction –
Nickel-Plated Contacts – Delrin Insulator
Mini-UHF Series Connectors
Commercial Grade Mini-UHF Series Connectors –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
200-800
Mini-UHF Plug Crimp 2pc RG58.
Commercial Grade Mini-UHF Series Connectors –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
200-803
Mini-UHF Plug Crimp 3pc RG58.
Commercial Grade Mini-UHF Series Connectors –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
200-805
Mini-UHF Plug Crimp 3pc RG58 –
Black Anodized Body.
Commercial Grade Mini-UHF Series Connectors –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
200-809
Mini-UHF Jack Crimp 3pc RG58.
Commercial Grade Mini-UHF Series Connectors –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
200-813
Mini-UHF Jack Panel Receptacle.
Commercial Grade Mini-UHF Series Connectors –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
Mini-UHF Series Adapters
Commercial Grade Mini-UHF Series Adapters –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
200-820
Mini-UHF Coupler Jack-Jack.
Commercial Grade Mini-UHF Series Adapters –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
200-822
Mini-UHF Coupler Plug-Plug.
Commercial Grade Mini-UHF Series Adapters –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
200-824
Mini-UHF Angle Adaptor Jack-Plug.
Commercial Grade Mini-UHF Series Adapters –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
200-826
Mini-UHF Tee Jack-Jack-Jack.
Commercial Grade Mini-UHF Series Adapters –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
200-828
Mini-UHF Tee Jack-Plug-Jack.
Commercial Grade Mini-UHF Series Adapters –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
N Series Connectors
Commercial Grade N Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
200-720
N Plug Clamp RG8A/11/213/214.
Commercial Grade N Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
200-723
N Plug Clamp for RG58/58A.
Commercial Grade N Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
200-726
N Jack Clamp RG8A/11/213/214.3
Commercial Grade N Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
200-729
N Jack Clamp for RG58/58A.
Commercial Grade N Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
200-731
N Jack Panel Receptacle.
Commercial Grade N Series Connectors –
Suitable for Video and Headend Applications –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
N Series Adapters
Commercial Grade N Series Adapters –
Suitable for Video and Headend Applications –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
200-734
N Coupler Jack-Jack .
Commercial Grade N Series Adapters –
Suitable for Video and Headend Applications –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
200-736
N Coupler Plug-Plug.
Commercial Grade N Series Adapters –
Suitable for Video and Headend Applications –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
200-742
N Angle Adapter Jack-Plug.
Commercial Grade N Series Adapters –
Suitable for Video and Headend Applications –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
200-746
F Jack to N Plug.
Commercial Grade N Series Adapters –
Suitable for Video and Headend Applications –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
200-748
BNC Jack to N Plug.
Commercial Grade N Series Adapters –
Suitable for Video and Headend Applications –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
200-750
UHF Jack to N Plug.
Commercial Grade N Series Adapters –
Suitable for Video and Headend Applications –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Delrin Insulator
SMA Series Connectors
Commercial Grade SMA Series Connectors –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Teflon Insulator
200-840
SMA Plug Clamp for RG58A.
Commercial Grade SMA Series Connectors –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Teflon Insulator
200-844
SMA Plug Crimp 3pc RG58A.
Commercial Grade SMA Series Connectors –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Teflon Insulator
200-846
SMA Plug Crimp 3pc RG59/62.
Commercial Grade SMA Series Connectors –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Teflon Insulator
200-849
SMA Jack Crimp 3pc RG58A.
Commercial Grade SMA Series Connectors –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Teflon Insulator
200-851
SMA Jack Crimp 3pc RG59/62.
Commercial Grade SMA Series Connectors –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Teflon Insulator
200-853
SMA Jack Panel Receptacle.
Commercial Grade SMA Series Connectors –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Teflon Insulator
SMA Series Adapters
Commercial Grade SMA Series Adapters –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Teflon Insulator
200-858
SMA Coupler Jack-Jack.
Commercial Grade SMA Series Adapters –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Teflon Insulator
200-860
SMA Coupler Plug-Plug.
Commercial Grade SMA Series Adapters –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Teflon Insulator
200-862
SMA Tee Adapter Jack-Jack-Jack.
Commercial Grade SMA Series Adapters –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Teflon Insulator
200-864
SMA Tee Adapter Jack-Plug-Jack.
Commercial Grade SMA Series Adapters –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Teflon Insulator
200-866
SMA Angle Adapter Jack-Plug.
Commercial Grade SMA Series Adapters –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Teflon Insulator
200-870
BNC Jack to SMA Plug.
Commercial Grade SMA Series Adapters –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Teflon Insulator
200-872
UHF Jack to SMA Plug.
Commercial Grade SMA Series Adapters –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Teflon Insulator
200-874
N Jack to SMA Plug.
Commercial Grade SMA Series Adapters –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Teflon Insulator
200-876
BNC Plug to SMA Plug.
Commercial Grade SMA Series Adapters –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Teflon Insulator
200-880
N Plug to SMA Plug.
Commercial Grade SMA Series Adapters –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Teflon Insulator
200-882
BNC Plug to SMA Jack.
Commercial Grade SMA Series Adapters –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Teflon Insulator
200-886
N Plug to SMA Jack.
Commercial Grade SMA Series Adapters –
Nickel-Plated Machined Brass Construction –
Gold-Plated Contacts – Teflon Insulator
Economy Bulk Coaxial Cable
Economy Grade Coaxial Cable Suitable for MATV and Consumer Applications and General RF Signal Transmission –
Supplied in 1000´ Reels
200-910BK
RG59/U Black 75" –
AWG22 CCS Center Conductor –
Aluminum Foil Shield and 32 x 0.12mm Alum/Copper Braid –
35% Braid Coverage –
0.146" OD PE Dielectric –
0.242" OD Black PVC Jacket.
Economy Grade Coaxial Cable Suitable for MATV and Consumer Applications and General RF Signal Transmission –
Supplied in 1000´ Reels
200-920BK
RG58/U Black 50" –
AWG20 Solid Copper Conductor –
Aluminum Foil Shield and 32 x 0.12mm Copper Braid –
35-40% Braid Coverage –
0.116" OD PE Dielectric –
0.195" OD Black PVC Jacket.
Economy Grade Coaxial Cable Suitable for MATV and Consumer Applications and General RF Signal Transmission –
Supplied in 1000´ Reels
200-930BK
RG6/U Black 75" –
AWG18 CCS Center Conductor –
Aluminum Foil Shield and 48 x 0.12mm Aluminum Braid –
30% Braid Coverage –
0.193" OD PE Dielectric –
0.275" OD Black PVC Jacket.
Economy Grade Coaxial Cable Suitable for MATV and Consumer Applications and General RF Signal Transmission –
Supplied in 1000´ Reels
Series-6 Coaxial Drop Cable
RG6/U Coaxial Cable –
Suitable for Digital HDTV Applications, CATV and Satellite Installations –
Fully Sweep Tested to 3GHz –
18 AWG Solid Copper or Copper-Clad Steel Center Conductor –
Gas Injected Polyethylene Dielectric –
Aluminum Foil Shield Bonded to Dielectric Insulator –
Aluminum Braid Shield, 60% or 60%-40% Coverage –
17 AWG Copper-Clad Steel Ground Wire –
Flame Retardant Lead-Free PVC Jacket, Foot-Marked –
Inhibitor additive protects cable from UV damage –
Dielectric 0.180" (4.57mm) nom. OD –
PVC Jacket 0.275" (7.00mm) nom. OD –
Nominal Impedance 75 ±3 Ohms –
Nominal Attenuation 6.54dB @ 1GHz, 10.0dB @ 2250MHz –
Structural Return Loss 20dB max @ 5-1000MHz, 15dB max @ 1001-2250MHz
200-927BK
1000´ RG6 CCS Conductor, Non-UL, Black – Reel in Box.
RG6/U Coaxial Cable –
Suitable for Digital HDTV Applications, CATV and Satellite Installations –
Fully Sweep Tested to 3GHz –
18 AWG Solid Copper or Copper-Clad Steel Center Conductor –
Gas Injected Polyethylene Dielectric –
Aluminum Foil Shield Bonded to Dielectric Insulator –
Aluminum Braid Shield, 60% or 60%-40% Coverage –
17 AWG Copper-Clad Steel Ground Wire –
Flame Retardant Lead-Free PVC Jacket, Foot-Marked –
Inhibitor additive protects cable from UV damage –
Dielectric 0.180" (4.57mm) nom. OD –
PVC Jacket 0.275" (7.00mm) nom. OD –
Nominal Impedance 75 ±3 Ohms –
Nominal Attenuation 6.54dB @ 1GHz, 10.0dB @ 2250MHz –
Structural Return Loss 20dB max @ 5-1000MHz, 15dB max @ 1001-2250MHz
200-927WH
1000´ RG6 CCS Conductor, Non-UL, White – Reel in Box.
RG6/U Coaxial Cable –
Suitable for Digital HDTV Applications, CATV and Satellite Installations –
Fully Sweep Tested to 3GHz –
18 AWG Solid Copper or Copper-Clad Steel Center Conductor –
Gas Injected Polyethylene Dielectric –
Aluminum Foil Shield Bonded to Dielectric Insulator –
Aluminum Braid Shield, 60% or 60%-40% Coverage –
17 AWG Copper-Clad Steel Ground Wire –
Flame Retardant Lead-Free PVC Jacket, Foot-Marked –
Inhibitor additive protects cable from UV damage –
Dielectric 0.180" (4.57mm) nom. OD –
PVC Jacket 0.275" (7.00mm) nom. OD –
Nominal Impedance 75 ±3 Ohms –
Nominal Attenuation 6.54dB @ 1GHz, 10.0dB @ 2250MHz –
Structural Return Loss 20dB max @ 5-1000MHz, 15dB max @ 1001-2250MHz
200-929BK
1000´ RG6 CCS Conductor, UL/CM Black – Spool .
RG6/U Coaxial Cable –
Suitable for Digital HDTV Applications, CATV and Satellite Installations –
Fully Sweep Tested to 3GHz –
18 AWG Solid Copper or Copper-Clad Steel Center Conductor –
Gas Injected Polyethylene Dielectric –
Aluminum Foil Shield Bonded to Dielectric Insulator –
Aluminum Braid Shield, 60% or 60%-40% Coverage –
17 AWG Copper-Clad Steel Ground Wire –
Flame Retardant Lead-Free PVC Jacket, Foot-Marked –
Inhibitor additive protects cable from UV damage –
Dielectric 0.180" (4.57mm) nom. OD –
PVC Jacket 0.275" (7.00mm) nom. OD –
Nominal Impedance 75 ±3 Ohms –
Nominal Attenuation 6.54dB @ 1GHz, 10.0dB @ 2250MHz –
Structural Return Loss 20dB max @ 5-1000MHz, 15dB max @ 1001-2250MHz
200-929WH
1000´ RG6 CCS Conductor, UL/CM White – Spool .
RG6/U Coaxial Cable –
Suitable for Digital HDTV Applications, CATV and Satellite Installations –
Fully Sweep Tested to 3GHz –
18 AWG Solid Copper or Copper-Clad Steel Center Conductor –
Gas Injected Polyethylene Dielectric –
Aluminum Foil Shield Bonded to Dielectric Insulator –
Aluminum Braid Shield, 60% or 60%-40% Coverage –
17 AWG Copper-Clad Steel Ground Wire –
Flame Retardant Lead-Free PVC Jacket, Foot-Marked –
Inhibitor additive protects cable from UV damage –
Dielectric 0.180" (4.57mm) nom. OD –
PVC Jacket 0.275" (7.00mm) nom. OD –
Nominal Impedance 75 ±3 Ohms –
Nominal Attenuation 6.54dB @ 1GHz, 10.0dB @ 2250MHz –
Structural Return Loss 20dB max @ 5-1000MHz, 15dB max @ 1001-2250MHz
200-931BK
1000´ RG6 CCS Conductor, UL/CM Black – Reel in Box .
RG6/U Coaxial Cable –
Suitable for Digital HDTV Applications, CATV and Satellite Installations –
Fully Sweep Tested to 3GHz –
18 AWG Solid Copper or Copper-Clad Steel Center Conductor –
Gas Injected Polyethylene Dielectric –
Aluminum Foil Shield Bonded to Dielectric Insulator –
Aluminum Braid Shield, 60% or 60%-40% Coverage –
17 AWG Copper-Clad Steel Ground Wire –
Flame Retardant Lead-Free PVC Jacket, Foot-Marked –
Inhibitor additive protects cable from UV damage –
Dielectric 0.180" (4.57mm) nom. OD –
PVC Jacket 0.275" (7.00mm) nom. OD –
Nominal Impedance 75 ±3 Ohms –
Nominal Attenuation 6.54dB @ 1GHz, 10.0dB @ 2250MHz –
Structural Return Loss 20dB max @ 5-1000MHz, 15dB max @ 1001-2250MHz
RG6/U Coaxial Cable –
Suitable for Digital HDTV Applications, CATV and Satellite Installations –
Fully Sweep Tested to 3GHz –
18 AWG Solid Copper or Copper-Clad Steel Center Conductor –
Gas Injected Polyethylene Dielectric –
Aluminum Foil Shield Bonded to Dielectric Insulator –
Aluminum Braid Shield, 60% or 60%-40% Coverage –
17 AWG Copper-Clad Steel Ground Wire –
Flame Retardant Lead-Free PVC Jacket, Foot-Marked –
Inhibitor additive protects cable from UV damage –
Dielectric 0.180" (4.57mm) nom. OD –
PVC Jacket 0.275" (7.00mm) nom. OD –
Nominal Impedance 75 ±3 Ohms –
Nominal Attenuation 6.54dB @ 1GHz, 10.0dB @ 2250MHz –
Structural Return Loss 20dB max @ 5-1000MHz, 15dB max @ 1001-2250MHz
290-601
1000´ RG6 CCS Single.
RG6/U Coaxial Cable –
Suitable for Digital HDTV Applications, CATV and Satellite Installations –
Fully Sweep Tested to 3GHz –
18 AWG Solid Copper or Copper-Clad Steel Center Conductor –
Gas Injected Polyethylene Dielectric –
Aluminum Foil Shield Bonded to Dielectric Insulator –
Aluminum Braid Shield, 60% or 60%-40% Coverage –
17 AWG Copper-Clad Steel Ground Wire –
Flame Retardant Lead-Free PVC Jacket, Foot-Marked –
Inhibitor additive protects cable from UV damage –
Dielectric 0.180" (4.57mm) nom. OD –
PVC Jacket 0.275" (7.00mm) nom. OD –
Nominal Impedance 75 ±3 Ohms –
Nominal Attenuation 6.54dB @ 1GHz, 10.0dB @ 2250MHz –
Structural Return Loss 20dB max @ 5-1000MHz, 15dB max @ 1001-2250MHz
290-602
1000´ RG6 Copper Single.
RG6/U Coaxial Cable –
Suitable for Digital HDTV Applications, CATV and Satellite Installations –
Fully Sweep Tested to 3GHz –
18 AWG Solid Copper or Copper-Clad Steel Center Conductor –
Gas Injected Polyethylene Dielectric –
Aluminum Foil Shield Bonded to Dielectric Insulator –
Aluminum Braid Shield, 60% or 60%-40% Coverage –
17 AWG Copper-Clad Steel Ground Wire –
Flame Retardant Lead-Free PVC Jacket, Foot-Marked –
Inhibitor additive protects cable from UV damage –
Dielectric 0.180" (4.57mm) nom. OD –
PVC Jacket 0.275" (7.00mm) nom. OD –
Nominal Impedance 75 ±3 Ohms –
Nominal Attenuation 6.54dB @ 1GHz, 10.0dB @ 2250MHz –
Structural Return Loss 20dB max @ 5-1000MHz, 15dB max @ 1001-2250MHz
290-603
1000´ RG6 CCS Single with Ground.
RG6/U Coaxial Cable –
Suitable for Digital HDTV Applications, CATV and Satellite Installations –
Fully Sweep Tested to 3GHz –
18 AWG Solid Copper or Copper-Clad Steel Center Conductor –
Gas Injected Polyethylene Dielectric –
Aluminum Foil Shield Bonded to Dielectric Insulator –
Aluminum Braid Shield, 60% or 60%-40% Coverage –
17 AWG Copper-Clad Steel Ground Wire –
Flame Retardant Lead-Free PVC Jacket, Foot-Marked –
Inhibitor additive protects cable from UV damage –
Dielectric 0.180" (4.57mm) nom. OD –
PVC Jacket 0.275" (7.00mm) nom. OD –
Nominal Impedance 75 ±3 Ohms –
Nominal Attenuation 6.54dB @ 1GHz, 10.0dB @ 2250MHz –
Structural Return Loss 20dB max @ 5-1000MHz, 15dB max @ 1001-2250MHz
290-604
1000´ RG6 Copper Single with Ground.
RG6/U Coaxial Cable –
Suitable for Digital HDTV Applications, CATV and Satellite Installations –
Fully Sweep Tested to 3GHz –
18 AWG Solid Copper or Copper-Clad Steel Center Conductor –
Gas Injected Polyethylene Dielectric –
Aluminum Foil Shield Bonded to Dielectric Insulator –
Aluminum Braid Shield, 60% or 60%-40% Coverage –
17 AWG Copper-Clad Steel Ground Wire –
Flame Retardant Lead-Free PVC Jacket, Foot-Marked –
Inhibitor additive protects cable from UV damage –
Dielectric 0.180" (4.57mm) nom. OD –
PVC Jacket 0.275" (7.00mm) nom. OD –
Nominal Impedance 75 ±3 Ohms –
Nominal Attenuation 6.54dB @ 1GHz, 10.0dB @ 2250MHz –
Structural Return Loss 20dB max @ 5-1000MHz, 15dB max @ 1001-2250MHz
290-611
1000´ RG6 CCS Dual.
RG6/U Coaxial Cable –
Suitable for Digital HDTV Applications, CATV and Satellite Installations –
Fully Sweep Tested to 3GHz –
18 AWG Solid Copper or Copper-Clad Steel Center Conductor –
Gas Injected Polyethylene Dielectric –
Aluminum Foil Shield Bonded to Dielectric Insulator –
Aluminum Braid Shield, 60% or 60%-40% Coverage –
17 AWG Copper-Clad Steel Ground Wire –
Flame Retardant Lead-Free PVC Jacket, Foot-Marked –
Inhibitor additive protects cable from UV damage –
Dielectric 0.180" (4.57mm) nom. OD –
PVC Jacket 0.275" (7.00mm) nom. OD –
Nominal Impedance 75 ±3 Ohms –
Nominal Attenuation 6.54dB @ 1GHz, 10.0dB @ 2250MHz –
Structural Return Loss 20dB max @ 5-1000MHz, 15dB max @ 1001-2250MHz
290-612
1000´ RG6 Copper Dual.
RG6/U Coaxial Cable –
Suitable for Digital HDTV Applications, CATV and Satellite Installations –
Fully Sweep Tested to 3GHz –
18 AWG Solid Copper or Copper-Clad Steel Center Conductor –
Gas Injected Polyethylene Dielectric –
Aluminum Foil Shield Bonded to Dielectric Insulator –
Aluminum Braid Shield, 60% or 60%-40% Coverage –
17 AWG Copper-Clad Steel Ground Wire –
Flame Retardant Lead-Free PVC Jacket, Foot-Marked –
Inhibitor additive protects cable from UV damage –
Dielectric 0.180" (4.57mm) nom. OD –
PVC Jacket 0.275" (7.00mm) nom. OD –
Nominal Impedance 75 ±3 Ohms –
Nominal Attenuation 6.54dB @ 1GHz, 10.0dB @ 2250MHz –
Structural Return Loss 20dB max @ 5-1000MHz, 15dB max @ 1001-2250MHz
290-613
1000´ RG6 CCS Dual with Ground.
RG6/U Coaxial Cable –
Suitable for Digital HDTV Applications, CATV and Satellite Installations –
Fully Sweep Tested to 3GHz –
18 AWG Solid Copper or Copper-Clad Steel Center Conductor –
Gas Injected Polyethylene Dielectric –
Aluminum Foil Shield Bonded to Dielectric Insulator –
Aluminum Braid Shield, 60% or 60%-40% Coverage –
17 AWG Copper-Clad Steel Ground Wire –
Flame Retardant Lead-Free PVC Jacket, Foot-Marked –
Inhibitor additive protects cable from UV damage –
Dielectric 0.180" (4.57mm) nom. OD –
PVC Jacket 0.275" (7.00mm) nom. OD –
Nominal Impedance 75 ±3 Ohms –
Nominal Attenuation 6.54dB @ 1GHz, 10.0dB @ 2250MHz –
Structural Return Loss 20dB max @ 5-1000MHz, 15dB max @ 1001-2250MHz
290-614
1000´ RG6 Copper Dual with Ground.
RG6/U Coaxial Cable –
Suitable for Digital HDTV Applications, CATV and Satellite Installations –
Fully Sweep Tested to 3GHz –
18 AWG Solid Copper or Copper-Clad Steel Center Conductor –
Gas Injected Polyethylene Dielectric –
Aluminum Foil Shield Bonded to Dielectric Insulator –
Aluminum Braid Shield, 60% or 60%-40% Coverage –
17 AWG Copper-Clad Steel Ground Wire –
Flame Retardant Lead-Free PVC Jacket, Foot-Marked –
Inhibitor additive protects cable from UV damage –
Dielectric 0.180" (4.57mm) nom. OD –
PVC Jacket 0.275" (7.00mm) nom. OD –
Nominal Impedance 75 ±3 Ohms –
Nominal Attenuation 6.54dB @ 1GHz, 10.0dB @ 2250MHz –
Structural Return Loss 20dB max @ 5-1000MHz, 15dB max @ 1001-2250MHz
Compression Termination Tools
Professional Watertight Termination of Series 59, 6, Coaxial Cables with Steren PermaSeal™ and Most Compression Fittings – Smooth One-Cycle Full Ratchet Mechanism –
Emergency Ratchet Release Lever –
Rugged Carbon Hardened Steel Construction –
Black-Oxide Plated – Comfortable Grip Handles for Reduced Fatigue – High-Lever Action Mechanism –
Display Packaged for Resale
204-001
Universal F-Fitting Compression Tool –
Red Rubberized Grip Handles –
Weight 16-oz –
Dimensions 3"(W) x 8 1/2"(H) x 1"(D).
Professional Watertight Termination of Series 59, 6, Coaxial Cables with Steren PermaSeal™ and Most Compression Fittings – Smooth One-Cycle Full Ratchet Mechanism –
Emergency Ratchet Release Lever –
Rugged Carbon Hardened Steel Construction –
Black-Oxide Plated – Comfortable Grip Handles for Reduced Fatigue – High-Lever Action Mechanism –
Display Packaged for Resale
204-031
Universal F RG11 Compression Tool –
Built-in Cable Cutter –
Yellow/Black Rubberized Grip Handles –
Weight 16-oz –
Dimensions 2"(W) x 9"(H) x 1"(D) .
Professional Watertight Termination of Series 59, 6, Coaxial Cables with Steren PermaSeal™ and Most Compression Fittings – Smooth One-Cycle Full Ratchet Mechanism –
Emergency Ratchet Release Lever –
Rugged Carbon Hardened Steel Construction –
Black-Oxide Plated – Comfortable Grip Handles for Reduced Fatigue – High-Lever Action Mechanism –
Display Packaged for Resale
204-034
3-Piece Die Set for 204-036.
Professional Watertight Termination of Series 59, 6, Coaxial Cables with Steren PermaSeal™ and Most Compression Fittings – Smooth One-Cycle Full Ratchet Mechanism –
Emergency Ratchet Release Lever –
Rugged Carbon Hardened Steel Construction –
Black-Oxide Plated – Comfortable Grip Handles for Reduced Fatigue – High-Lever Action Mechanism –
Display Packaged for Resale
204-036
Universal Compression Tool –
Terminates F, RCA, and BNC Fittings –
Integrated Interchangeable Dies –
Built-in Cable Cutter –
Yellow/Black Rubberized Grip Handles –
Weight 17-oz –
Dimensions 2"(W) x 9"(H) x 1"(D).
Professional Watertight Termination of Series 59, 6, Coaxial Cables with Steren PermaSeal™ and Most Compression Fittings – Smooth One-Cycle Full Ratchet Mechanism –
Emergency Ratchet Release Lever –
Rugged Carbon Hardened Steel Construction –
Black-Oxide Plated – Comfortable Grip Handles for Reduced Fatigue – High-Lever Action Mechanism –
Display Packaged for Resale
Crimp Termination Tools
Professional Termination of RG6/11/58/59/62 Fittings –
Rugged Hardened Carbon Steel Construction –
Black-Oxide Plated – Comfortable Grip Handles for Reduced Hand Fatigue – High-Lever Action Mechanism –
Display Packaged for Resale
204-004
3-Cavity 9" Hex Crimp Tool for RG58, –
RG59 and RG62 Coaxial Fittings –
Hex Die 0.256", 0.213", 0.068" –
Full-Cycle Ratchet Mechanism –
Yellow Grip Handles – Weight 16oz –
Dimensions 2 1/2"(W) x 8 1/2" (H) x 3/4"(D).
Professional Termination of RG6/11/58/59/62 Fittings –
Rugged Hardened Carbon Steel Construction –
Black-Oxide Plated – Comfortable Grip Handles for Reduced Hand Fatigue – High-Lever Action Mechanism –
Display Packaged for Resale
204-005
4-Cavity 9" Hex Crimp Tool for Coaxial Center Contacts, RG58, –
RG59, RG62, RG6 Coaxial Fittings –
Hex Die 0.319", 0.256", 0.213", 0.068" –
Full-Cycle Ratchet Mechanism –
Red Grip Handles – Weight 16oz –
Dimensions 2 1/2"(W) x 8 3/4"(H) x 3/4"(D).
Professional Termination of RG6/11/58/59/62 Fittings –
Rugged Hardened Carbon Steel Construction –
Black-Oxide Plated – Comfortable Grip Handles for Reduced Hand Fatigue – High-Lever Action Mechanism –
Display Packaged for Resale
204-007
2-Cavity 9" Hex Crimp Tool for RG59, RG62, and RG6 Coaxial Fittings –
Hex Die 0.319", 0.256" –
Red Grip Handles – Weight 16oz –
Dimensions 3"(W) x 9"(H) x 3/4"(D).
Professional Termination of RG6/11/58/59/62 Fittings –
Rugged Hardened Carbon Steel Construction –
Black-Oxide Plated – Comfortable Grip Handles for Reduced Hand Fatigue – High-Lever Action Mechanism –
Display Packaged for Resale
204-009
2-Cavity 9" Hex Crimp Tool for RG59, RG6 Universal and RG11 Fittings –
Hex Die 0.480", 0.362" –
Star-wheel adjustable jaw-tension provides consistent crimping –
Blue Grip Handles – Weight 16oz –
Dimensions 2 1/2"(W) x 8 3/4"(H) x 3/4"(D).
Professional Termination of RG6/11/58/59/62 Fittings –
Rugged Hardened Carbon Steel Construction –
Black-Oxide Plated – Comfortable Grip Handles for Reduced Hand Fatigue – High-Lever Action Mechanism –
Display Packaged for Resale
Economy Crimp Tools
2-Cavity 8" Hex Economy Crimp Tool –
Suitable for RG59-62-6 Fittings –
Black Grip Handles – Weight 11oz –
Dimensions 2"(W) x 8"(H) x 3/4"(D)
Cable Preparation Tools
204-200
Precision Coaxial Cable Stripper for RG58, RG59, RG62 and RG6 – Clothes Pin-Style –
Spring Loaded – Center-Pin Cutter –
Fixed 3-Blade Construction –
Strips cable jacket, shield, insulation –
Slide Cable Selection –
Requires no blade adjustment –
High Impact ABS Construction.
204-202
Precision Coaxial Cable Stripper for RG58, RG59, RG62 and RG6 – Thumb Wind-Style –
Adjustable 2 or 3-Blade Construction –
Strips cable jacket, shield, insulation –
High-Impact ABS Plastic Construction.
204-205
Precision Coaxial Cable Stripper for RG58, RG59, RG62 and RG6 – Thumb-Wind Style –
Adjustable 2-Blade Construction –
Strips cable jacket, shield, insulation –
High-Impact ABS Plastic Construction.
204-210
Replacement Blade Cartridge for Coaxial Cable Stripper 204-200.
204-212
3-Piece Replacement Blade Set for Coaxial Cable Stripper 204-202.
204-215
2-Piece Replacement Blade Set for Coaxial Cable Stripper 204-205.
204-300
Economy Rotary Coaxial Cutter-Stripper for Coaxial Cables RG6, RG58, RG59 or Diameters 0.19"-0.30" – Requires no blade adjustment.
3-Piece Replacement Blade Set for Telecom Cable Stripper-Cutter 993-750.
Pocket Toners
Traces runs, identifying shorts and confirming DC continuity in video, voice, data and audio
cables – Uses a DC current to check for continuity or shorts – Easily viewable LED indicator
lights up to identify shorts – Tone detector emits audible sound to confirm DC continuity – Right-angle head ensures ease-of-use in tight spaces – Detachable tone detector screws onto bottom of tester when not in use – Includes long-life 12V battery
203-550
Pocket Toner (Only).
Traces runs, identifying shorts and confirming DC continuity in video, voice, data and audio
cables – Uses a DC current to check for continuity or shorts – Easily viewable LED indicator
lights up to identify shorts – Tone detector emits audible sound to confirm DC continuity – Right-angle head ensures ease-of-use in tight spaces – Detachable tone detector screws onto bottom of tester when not in use – Includes long-life 12V battery
203-560
Pocket Toner Test Kit – Includes F, RCA, BNC, RJ11 and RJ45 adapters – Toner and adapters fit into slots inside durable carrying case.
Traces runs, identifying shorts and confirming DC continuity in video, voice, data and audio
cables – Uses a DC current to check for continuity or shorts – Easily viewable LED indicator
lights up to identify shorts – Tone detector emits audible sound to confirm DC continuity – Right-angle head ensures ease-of-use in tight spaces – Detachable tone detector screws onto bottom of tester when not in use – Includes long-life 12V battery
Security Shields
11/8˝ Die-Cast Metal Security Shields –
0.58˝ Wall Thickness – 5/8˝ Diameter –
Blocks wrench access – Protects F connectors on traps, ground blocks and converters from unwanted tampering
200-966
1 1/8" Metal Screw-On Shield.
11/8˝ Die-Cast Metal Security Shields –
0.58˝ Wall Thickness – 5/8˝ Diameter –
Blocks wrench access – Protects F connectors on traps, ground blocks and converters from unwanted tampering
200-968
1 1/8" Metal Slip-On Shield.
11/8˝ Die-Cast Metal Security Shields –
0.58˝ Wall Thickness – 5/8˝ Diameter –
Blocks wrench access – Protects F connectors on traps, ground blocks and converters from unwanted tampering
Security Tools
Security Shield Tool –
Precision Machined Nickel-Plated –
Steel Construction –
7/16" socket ensures even pressure –
Sure Grip-End and Clip Ring for Increased Tightening Leverage –
Suitable for Use with 200-966 and 200-968 Security Sleeves
Mini RG59 F PermaSeal-II Connectors
Premium Quality, Ultra High-Performance F Compression Connectors –
Designed for Coaxial Video and Audio Applications –
Quick, Easy Installation on Mini RG59 Cable –
Makes permanent 360-degree connector-to-cable attachment and seal –
Uses Steren 204-036 compression tool –
Constructed of Precision Machined Annealed Brass –
Maximum Conductivity Anti-Corrosion Gold or Nickel-Plated Finish –
Includes six color-coded bands for flexible, field-configurable cable ID during installation
200-003
Mini RG59 F Nickel PermaSeal-II Compression Connector.
Premium Quality, Ultra High-Performance F Compression Connectors –
Designed for Coaxial Video and Audio Applications –
Quick, Easy Installation on Mini RG59 Cable –
Makes permanent 360-degree connector-to-cable attachment and seal –
Uses Steren 204-036 compression tool –
Constructed of Precision Machined Annealed Brass –
Maximum Conductivity Anti-Corrosion Gold or Nickel-Plated Finish –
Includes six color-coded bands for flexible, field-configurable cable ID during installation
200-080
Mini RG59 F Gold PermaSeal-II Compression Connector.
Premium Quality, Ultra High-Performance F Compression Connectors –
Designed for Coaxial Video and Audio Applications –
Quick, Easy Installation on Mini RG59 Cable –
Makes permanent 360-degree connector-to-cable attachment and seal –
Uses Steren 204-036 compression tool –
Constructed of Precision Machined Annealed Brass –
Maximum Conductivity Anti-Corrosion Gold or Nickel-Plated Finish –
Includes six color-coded bands for flexible, field-configurable cable ID during installation
BNC PermaSeal-II Connectors
Premium Quality, Ultra High-Performance BNC Compression Connectors –
Designed for Coaxial Video and Audio Applications –
Quick, Easy Installation on RG6, RG6-Quad, RG59 or Mini RG59 Cable –
Makes permanent 360-degree connector-to-cable attachment and seal –
Uses Steren 204-036 compression tool –
Constructed of Precision Machined Annealed Brass –
Maximum Conductivity Anti-Corrosion Gold or Nickel-Plated Finish – Includes six color-coded bands for flexible, field-configurable cable ID during installation
200-082
Mini RG59 BNC Gold PermaSeal-II Compression Connector.
Premium Quality, Ultra High-Performance BNC Compression Connectors –
Designed for Coaxial Video and Audio Applications –
Quick, Easy Installation on RG6, RG6-Quad, RG59 or Mini RG59 Cable –
Makes permanent 360-degree connector-to-cable attachment and seal –
Uses Steren 204-036 compression tool –
Constructed of Precision Machined Annealed Brass –
Maximum Conductivity Anti-Corrosion Gold or Nickel-Plated Finish – Includes six color-coded bands for flexible, field-configurable cable ID during installation
200-084
RG59 BNC Gold PermaSeal-II Compression Connector.
Premium Quality, Ultra High-Performance BNC Compression Connectors –
Designed for Coaxial Video and Audio Applications –
Quick, Easy Installation on RG6, RG6-Quad, RG59 or Mini RG59 Cable –
Makes permanent 360-degree connector-to-cable attachment and seal –
Uses Steren 204-036 compression tool –
Constructed of Precision Machined Annealed Brass –
Maximum Conductivity Anti-Corrosion Gold or Nickel-Plated Finish – Includes six color-coded bands for flexible, field-configurable cable ID during installation
200-086
RG6 BNC Gold PermaSeal-II Compression Connector.
Premium Quality, Ultra High-Performance BNC Compression Connectors –
Designed for Coaxial Video and Audio Applications –
Quick, Easy Installation on RG6, RG6-Quad, RG59 or Mini RG59 Cable –
Makes permanent 360-degree connector-to-cable attachment and seal –
Uses Steren 204-036 compression tool –
Constructed of Precision Machined Annealed Brass –
Maximum Conductivity Anti-Corrosion Gold or Nickel-Plated Finish – Includes six color-coded bands for flexible, field-configurable cable ID during installation
Premium Quality, Ultra High-Performance BNC Compression Connectors –
Designed for Coaxial Video and Audio Applications –
Quick, Easy Installation on RG6, RG6-Quad, RG59 or Mini RG59 Cable –
Makes permanent 360-degree connector-to-cable attachment and seal –
Uses Steren 204-036 compression tool –
Constructed of Precision Machined Annealed Brass –
Maximum Conductivity Anti-Corrosion Gold or Nickel-Plated Finish – Includes six color-coded bands for flexible, field-configurable cable ID during installation
Premium Quality, Ultra High-Performance BNC Compression Connectors –
Designed for Coaxial Video and Audio Applications –
Quick, Easy Installation on RG6, RG6-Quad, RG59 or Mini RG59 Cable –
Makes permanent 360-degree connector-to-cable attachment and seal –
Uses Steren 204-036 compression tool –
Constructed of Precision Machined Annealed Brass –
Maximum Conductivity Anti-Corrosion Gold or Nickel-Plated Finish – Includes six color-coded bands for flexible, field-configurable cable ID during installation
Premium Quality, Ultra High-Performance BNC Compression Connectors –
Designed for Coaxial Video and Audio Applications –
Quick, Easy Installation on RG6, RG6-Quad, RG59 or Mini RG59 Cable –
Makes permanent 360-degree connector-to-cable attachment and seal –
Uses Steren 204-036 compression tool –
Constructed of Precision Machined Annealed Brass –
Maximum Conductivity Anti-Corrosion Gold or Nickel-Plated Finish – Includes six color-coded bands for flexible, field-configurable cable ID during installation
200-163
Mini RG59 BNC Nickel PermaSeal-II Compression Connector.
Premium Quality, Ultra High-Performance BNC Compression Connectors –
Designed for Coaxial Video and Audio Applications –
Quick, Easy Installation on RG6, RG6-Quad, RG59 or Mini RG59 Cable –
Makes permanent 360-degree connector-to-cable attachment and seal –
Uses Steren 204-036 compression tool –
Constructed of Precision Machined Annealed Brass –
Maximum Conductivity Anti-Corrosion Gold or Nickel-Plated Finish – Includes six color-coded bands for flexible, field-configurable cable ID during installation
Premium Quality, Ultra High-Performance BNC Compression Connectors –
Designed for Coaxial Video and Audio Applications –
Quick, Easy Installation on RG6, RG6-Quad, RG59 or Mini RG59 Cable –
Makes permanent 360-degree connector-to-cable attachment and seal –
Uses Steren 204-036 compression tool –
Constructed of Precision Machined Annealed Brass –
Maximum Conductivity Anti-Corrosion Gold or Nickel-Plated Finish – Includes six color-coded bands for flexible, field-configurable cable ID during installation
RCA PermaSeal-II Connectors
Premium Quality, Ultra High-Performance RCA Compression Connectors –
Designed for Coaxial Video and Audio Applications –
Quick, Easy Installation on RG6, RG6-Quad, RG59 or Mini RG59 Cable –
Makes permanent 360-degree connector-to-cable attachment and seal –
Uses Steren 204-036 compression tool –
Constructed of Precision Machined Annealed Brass –
Maximum Conductivity Anti-Corrosion Gold or Nickel-Plated Finish – Includes six color-coded bands for flexible, field-configurable cable ID during installation
Premium Quality, Ultra High-Performance RCA Compression Connectors –
Designed for Coaxial Video and Audio Applications –
Quick, Easy Installation on RG6, RG6-Quad, RG59 or Mini RG59 Cable –
Makes permanent 360-degree connector-to-cable attachment and seal –
Uses Steren 204-036 compression tool –
Constructed of Precision Machined Annealed Brass –
Maximum Conductivity Anti-Corrosion Gold or Nickel-Plated Finish – Includes six color-coded bands for flexible, field-configurable cable ID during installation
Premium Quality, Ultra High-Performance RCA Compression Connectors –
Designed for Coaxial Video and Audio Applications –
Quick, Easy Installation on RG6, RG6-Quad, RG59 or Mini RG59 Cable –
Makes permanent 360-degree connector-to-cable attachment and seal –
Uses Steren 204-036 compression tool –
Constructed of Precision Machined Annealed Brass –
Maximum Conductivity Anti-Corrosion Gold or Nickel-Plated Finish – Includes six color-coded bands for flexible, field-configurable cable ID during installation
200-069
Mini RG59 RCA Nickel PermaSeal-II Compression Connector.
Premium Quality, Ultra High-Performance RCA Compression Connectors –
Designed for Coaxial Video and Audio Applications –
Quick, Easy Installation on RG6, RG6-Quad, RG59 or Mini RG59 Cable –
Makes permanent 360-degree connector-to-cable attachment and seal –
Uses Steren 204-036 compression tool –
Constructed of Precision Machined Annealed Brass –
Maximum Conductivity Anti-Corrosion Gold or Nickel-Plated Finish – Includes six color-coded bands for flexible, field-configurable cable ID during installation
Premium Quality, Ultra High-Performance RCA Compression Connectors –
Designed for Coaxial Video and Audio Applications –
Quick, Easy Installation on RG6, RG6-Quad, RG59 or Mini RG59 Cable –
Makes permanent 360-degree connector-to-cable attachment and seal –
Uses Steren 204-036 compression tool –
Constructed of Precision Machined Annealed Brass –
Maximum Conductivity Anti-Corrosion Gold or Nickel-Plated Finish – Includes six color-coded bands for flexible, field-configurable cable ID during installation
200-081
Mini RG59 RCA Gold PermaSeal-II Compression Connector.
Premium Quality, Ultra High-Performance RCA Compression Connectors –
Designed for Coaxial Video and Audio Applications –
Quick, Easy Installation on RG6, RG6-Quad, RG59 or Mini RG59 Cable –
Makes permanent 360-degree connector-to-cable attachment and seal –
Uses Steren 204-036 compression tool –
Constructed of Precision Machined Annealed Brass –
Maximum Conductivity Anti-Corrosion Gold or Nickel-Plated Finish – Includes six color-coded bands for flexible, field-configurable cable ID during installation
200-083
RG59 RCA Gold PermaSeal-II Compression Connector.
Premium Quality, Ultra High-Performance RCA Compression Connectors –
Designed for Coaxial Video and Audio Applications –
Quick, Easy Installation on RG6, RG6-Quad, RG59 or Mini RG59 Cable –
Makes permanent 360-degree connector-to-cable attachment and seal –
Uses Steren 204-036 compression tool –
Constructed of Precision Machined Annealed Brass –
Maximum Conductivity Anti-Corrosion Gold or Nickel-Plated Finish – Includes six color-coded bands for flexible, field-configurable cable ID during installation
200-085
RG6 RCA Gold PermaSeal-II Compression Connector.
Premium Quality, Ultra High-Performance RCA Compression Connectors –
Designed for Coaxial Video and Audio Applications –
Quick, Easy Installation on RG6, RG6-Quad, RG59 or Mini RG59 Cable –
Makes permanent 360-degree connector-to-cable attachment and seal –
Uses Steren 204-036 compression tool –
Constructed of Precision Machined Annealed Brass –
Maximum Conductivity Anti-Corrosion Gold or Nickel-Plated Finish – Includes six color-coded bands for flexible, field-configurable cable ID during installation
Premium Quality, Ultra High-Performance RCA Compression Connectors –
Designed for Coaxial Video and Audio Applications –
Quick, Easy Installation on RG6, RG6-Quad, RG59 or Mini RG59 Cable –
Makes permanent 360-degree connector-to-cable attachment and seal –
Uses Steren 204-036 compression tool –
Constructed of Precision Machined Annealed Brass –
Maximum Conductivity Anti-Corrosion Gold or Nickel-Plated Finish – Includes six color-coded bands for flexible, field-configurable cable ID during installation
Coaxial CCTV-Cam Cable
RG59 Coaxial Cable with 2-Conductor Power-Limited Cable –
Suitable for CCTV Installations –
20 AWG Solid Copper Center Conductor –
Gas Injected Polyethylene Dielectric –
Copper Braid Shield, 95% Coverage –
2-Conductor 18 AWG Stranded Copper –
Flame Retardant PVC Insulation and Outer Jackets –
Impedance 75 Ohms –
UL Listed – NEC Type CM, CL3
200-915BK
500´ RG59 Coaxial CCTV-Cam Cable, Black – Spool.
RG59 Coaxial Cable with 2-Conductor Power-Limited Cable –
Suitable for CCTV Installations –
20 AWG Solid Copper Center Conductor –
Gas Injected Polyethylene Dielectric –
Copper Braid Shield, 95% Coverage –
2-Conductor 18 AWG Stranded Copper –
Flame Retardant PVC Insulation and Outer Jackets –
Impedance 75 Ohms –
UL Listed – NEC Type CM, CL3
200-915WH
500´ RG59 Coaxial CCTV-Cam Cable, White – Spool.
RG59 Coaxial Cable with 2-Conductor Power-Limited Cable –
Suitable for CCTV Installations –
20 AWG Solid Copper Center Conductor –
Gas Injected Polyethylene Dielectric –
Copper Braid Shield, 95% Coverage –
2-Conductor 18 AWG Stranded Copper –
Flame Retardant PVC Insulation and Outer Jackets –
Impedance 75 Ohms –
UL Listed – NEC Type CM, CL3
BNC Connector Crimp Kit
50 or 75 Ohm BNC Crimp Kit –
Nickel-Plated Connector Bodies, Ferrules and Washers –
Delrin Dielectric –
Gold Plated Center Contacts –
Includes RG58/RG59P, RG59/RG6P and RG6/RG8X ferrules
200-123
75 Ohm BNC Male with 3 Ferrules.
50 or 75 Ohm BNC Crimp Kit –
Nickel-Plated Connector Bodies, Ferrules and Washers –
Delrin Dielectric –
Gold Plated Center Contacts –
Includes RG58/RG59P, RG59/RG6P and RG6/RG8X ferrules
200-124
75 Ohm BNC Female with 3 Ferrules.
50 or 75 Ohm BNC Crimp Kit –
Nickel-Plated Connector Bodies, Ferrules and Washers –
Delrin Dielectric –
Gold Plated Center Contacts –
Includes RG58/RG59P, RG59/RG6P and RG6/RG8X ferrules
